Working Repetier Host Firmware Config

All about the retired H-1.1 3D Printers
Post Reply
menza
Plasticator
Posts: 7
Joined: Tue Jan 15, 2013 9:37 pm

Working Repetier Host Firmware Config

Post by menza »

Can anyone post a working repetier firmware configuration.h and pins.h files?
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5412
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Working Repetier Host Firmware Config

Post by mhackney »

We're just installing Repetier this weekend and should have something soon. What sorts of problems are you having?

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5412
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:

Re: Working Repetier Host Firmware Config

Post by mhackney »

What board are you running on?

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints

Strategies for Resolving Print Artifacts

The Eclectic Angler
menza
Plasticator
Posts: 7
Joined: Tue Jan 15, 2013 9:37 pm

Re: Working Repetier Host Firmware Config

Post by menza »

I am using a RAMBO board. The problem I have is that the Z Axis more or less seizes up when I try to move it in either direction. I don't have this problem using Marlin, so I assume it is something in my configuration. I used the stock Repetier for Rambo files.
Post Reply

Return to “H-1.1 3D Printers”