Page 1 of 1
Printing in PLA
Posted: Thu Jul 21, 2016 5:59 pm
by jon bondy
I want to start printing using PLA and Repetier Host (and Slic3r). Has anyone already dialed this in on the Rostock Max?
Re: Printing in PLA
Posted: Thu Jul 21, 2016 6:49 pm
by joe
Can't think of anyone. Just set the bed to 60 or 65 and hotend to 200 and give it a go.
Re: Printing in PLA
Posted: Thu Jul 21, 2016 6:57 pm
by IMBoring25
I use 45-55 on the bed (for small and large footprint parts, respectively) and 205 on the extruder. Pretty standard settings for what I've seen recommended for PLA.
Re: Printing in PLA
Posted: Fri Jul 22, 2016 8:01 am
by Jimustanguitar
Here's everything you'd want to know about printing in PLA, and more.
http://forum.seemecnc.com/viewtopic.php ... 43&p=48771