Rambo and the Viki Display

The RAMBo board is finally here, and here's a place to talk about it!
Post Reply
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7185
Joined: Sun Apr 01, 2012 5:26 pm

Rambo and the Viki Display

Post by Eaglezsoar »

Has anyone successfully interfaced the Pannucatt Viki display with the Rambo controller and if so could you briefly tell us what needs to
be done to make it work?
Eric
Printmaster!
Posts: 726
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: Rambo and the Viki Display

Post by Eric »

There's nothing about the hardware that's incompatible. It's all about firmware support, and there are many firmware choices.

In Repetier it appears to be supported. Set FEATURE_CONTROLLER to 5 in "configuration.h". Also make sure pin assignments in "ui.h" are correct for whatever rambo pins you choose to use.

Can't help much beyond glancing at the code, as I don't own either a Rambo or a Viki.
Post Reply

Return to “RAMBo”