Sculptris by Pixologic

http://pixologic.com/sculptris/
Post Reply
User avatar
PartDaddy
Printmaster!
Posts: 374
Joined: Fri Mar 23, 2012 4:03 pm

Sculptris by Pixologic

Post by PartDaddy »

I was searching for sculpting software recently and found Sculptris. The software is here: http://pixologic.com/sculptris/

Very intuitive and fun. To print something you create, export the .OBJ file, then open the .OBJ using Slic3r. After scaling and orienting, you can export the .STL. Finally, open the .STL in Repetier and process as usual.
~PartDaddy
SeeMeCNC Owner & Founder
Blackpoint Engineering is SeeMeCNC
Since 1996
User avatar
Island3
Plasticator
Posts: 18
Joined: Tue Jun 04, 2013 10:34 pm

Re: Sculptris by Pixologic

Post by Island3 »

Heyyyyy this is very cool!! It's perfect for us visual folks.
User avatar
LorenOlepi
Printmaster!
Posts: 76
Joined: Tue Apr 30, 2013 5:40 pm
Location: CT

Re: Sculptris by Pixologic

Post by LorenOlepi »

Yeah this software is awesome... use it to touch up/modify my 3d Scans ;)
User avatar
Print_This
Printmaster!
Posts: 86
Joined: Sun Feb 23, 2014 11:56 pm

Re: Sculptris by Pixologic

Post by Print_This »

very cool, i actually used it export it, and import into autodesk print utility and it repaired it and then just exported out as stl from there. have to spend more time on it! :)
--------------
If you survive chicago winters you can survive 3d printing!
Post Reply

Return to “Sculptris”