A John Oly caption that photo contest :)
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: A John Oly caption that photo contest :)
No prize, just street cred.
Thought you'd enjoy the funny picture
Thought you'd enjoy the funny picture
Re: A John Oly caption that photo contest :)
"If you're gonna screw around, you NEED one of these!"
"This is my bolt! There are many like it, but this one is mine!"
g.
"This is my bolt! There are many like it, but this one is mine!"
g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
- Jimustanguitar
- ULTIMATE 3D JEDI
- Posts: 2631
- Joined: Sun Mar 31, 2013 1:35 am
- Location: Notre Dame area
- Contact:
Re: A John Oly caption that photo contest :)
"If you think you have enough filament, you're screwed."
Re: A John Oly caption that photo contest :)
"Screw it, just buy a Rostock Max V2!"
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
Re: A John Oly caption that photo contest :)
"Our machines are easily built by the visually impaired"
- joecnc2006
- Printmaster!
- Posts: 150
- Joined: Tue May 14, 2013 11:42 am
Re: A John Oly caption that photo contest :)
"Don't get screwed, Buy a Rostock Max V2"
Joe
http://www.joescnc.com" onclick="window.open(this.href);return false;
http://www.joescnc.com" onclick="window.open(this.href);return false;
Re: A John Oly caption that photo contest :)
"This is a prototype bolt for our self-assembly of our next printer: the Rostock MaxZilla".
Re: A John Oly caption that photo contest :)
We've upp'd our quality, now up yours!
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
Re: A John Oly caption that photo contest :)
"It only takes four minutes to print one of these. Show you? No, to see that, you've got to buy the printer."
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a" onclick="window.open(this.href);return false;
http://dropc.am/p/KhiI1a" onclick="window.open(this.href);return false;
-
- Printmaster!
- Posts: 809
- Joined: Wed Dec 11, 2013 9:11 pm
- Location: Queensland, Australia
- Contact:
Re: A John Oly caption that photo contest :)
"What, you don't want to buy one? Well then have this"
I loved my Rostock so much I now sell them in Oz
-
- Printmaster!
- Posts: 210
- Joined: Sun Feb 09, 2014 10:15 pm
- Location: Wakefield, MA
- Contact:
Re: A John Oly caption that photo contest :)
"I seem to be missing a nut."
Re: A John Oly caption that photo contest :)
"... and it's ribbed for her pleasure!"
Re: A John Oly caption that photo contest :)
"Yeah...occasionally you'll have a left over bolt after you finish assembly...no big deal."
-"Simpler is better, except when complicated looks really cool."
-"As soon as you make something fool proof...along comes an idiot."
-"I have not failed. I've just found 10,000 ways that won't work." ~Thomas Edison
-"As soon as you make something fool proof...along comes an idiot."
-"I have not failed. I've just found 10,000 ways that won't work." ~Thomas Edison
- barry99705
- Printmaster!
- Posts: 707
- Joined: Sun Aug 11, 2013 6:10 pm
- Location: west ohio
Re: A John Oly caption that photo contest :)
My nuts are huge too!
Never do anything you don't want to have to explain to the paramedics.
Re: A John Oly caption that photo contest :)
That's good!~barry99705 wrote:My nuts are huge too!
Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art
Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts
The Eclectic Angler
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: A John Oly caption that photo contest :)
I thought it was missing a nut also but then I saw John holding it!
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Re: A John Oly caption that photo contest :)
"Ironically, we need to finish our newest model printer to print the spanner for this set screw for that printer"
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: A John Oly caption that photo contest :)
Maybe 4 minutes to print the bolt but forever to print the nut, they haven't figured out how to print a John Oly.JohnStack wrote:"It only takes four minutes to print one of these. Show you? No, to see that, you've got to buy the printer."
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”
Re: A John Oly caption that photo contest :)
*looks at the pile of failed John Oly prints*Eaglezsoar wrote: they haven't figured out how to print a John Oly.
*Shudders*
Why are they still moving?!
- Demolishun
- Printmaster!
- Posts: 148
- Joined: Wed May 07, 2014 4:28 am
- Location: SE Idaho, USA
Re: A John Oly caption that photo contest :)
"It is important to remember the dimensions you designed your part in. Centimeters are not equal to inches."
"We are working with Filabot to create a 50mm filament extruder. While this is not the final material to be used it does give you an idea of the brass nozzle we will use for the filament maker."
"We are working with Filabot to create a 50mm filament extruder. While this is not the final material to be used it does give you an idea of the brass nozzle we will use for the filament maker."
Challenge yourself and be a more awesome you.
Re: A John Oly caption that photo contest :)
Dear lord Vader,
My name is John Oly, and all of us here at SeeMee CNC are very interested in securing your government contract! Our engineers have designed this special bolt to hold down our proprietary exhaust port cover shield. Obviously we can't reveal all of our secrets as to how this shield may work; sufficed to say it's about the size of a womp rat, and attaches with these custom bolts. We hope that seeing this prototype demonstrates our earnest desire to be part of the Death Star team!
sincerly,
SeeMe CNC
My name is John Oly, and all of us here at SeeMee CNC are very interested in securing your government contract! Our engineers have designed this special bolt to hold down our proprietary exhaust port cover shield. Obviously we can't reveal all of our secrets as to how this shield may work; sufficed to say it's about the size of a womp rat, and attaches with these custom bolts. We hope that seeing this prototype demonstrates our earnest desire to be part of the Death Star team!
sincerly,
SeeMe CNC
Last edited by carter on Wed May 28, 2014 10:32 pm, edited 1 time in total.
- barry99705
- Printmaster!
- Posts: 707
- Joined: Sun Aug 11, 2013 6:10 pm
- Location: west ohio
Re: A John Oly caption that photo contest :)
carter wrote:Dear lord Vader,
My name is John Oly, and all of us here at SeeMee CNC are very interested in securing your government contract! Our engineers have designed this special bolt to hold down our proprietary exhaust port cover shield. obviously we can't reveal all of our secrets as to how this shield may work, but we hope that seeing this prototype demonstrates our earnest desire to be part of the Death Star team!
sincerly,
SeeMe CNC
Winner!!
Never do anything you don't want to have to explain to the paramedics.
Re: A John Oly caption that photo contest :)
Yep, it's official, that's the winner right there
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7185
- Joined: Sun Apr 01, 2012 5:26 pm
Re: A John Oly caption that photo contest :)
Good job barry99705!
“ Do Not Regret Growing Older. It is a Privilege Denied to Many. ”