Just Fits (Part Daddy in Trailer)

[ZionPhil]

http://makerhive.proboards.com/thread/9 ... dy-trailer" onclick="window.open(this.href);return false;

[Eaglezsoar]

One more inch and the door would not close. Great that it did fit!

[johnoly99]

prob. less than an inch even! The rubber feet need to be removed, or the doors don't close

[Tonkabot]

Your problem is that you need one of these, and a printer to fill it:

https://www.dropbox.com/s/3cjyspp8jl4uc ... _.jpg?dl=0

[timothysvec]

You're not straight out'a Compton.....Your straight out of the trailer! Good luck guy's! Also does anyone know how many amp's a 12 volt heater cartridge pulls. i'm going to try to mod my seeme for those.

[Tonkabot]

I thought they are rated at 30W, so 2.5 A. I = P/V (E is the same as V)

[Edit] So if they are 40W, that's 3.3A

[img]http://upload.wikimedia.org/wikipedia/c ... _chart.svg[/img]

[jdurand]

The ones I've seen are 40W.

Just remember, small changes in voltage lead to big changes in Wattage. That's why I have #4 (5.2 square mm) wire for my small solar panels, our building code understands this.

A 10% decrease in voltage is a 19% decrease in Wattage!

Doubling the voltage is a 400% increase in Wattage.

[timothysvec]

Thank's .... I put one of those heater cartridges in my seeme hot end .... And now ... My power supply fan run's... All the time.