There are still somes MAX V2

Post a pic of your CNC machines!
Post Reply
Khayrisill
Printmaster!
Posts: 69
Joined: Thu Aug 25, 2016 9:09 am
Location: Montréal, CA
Contact:

There are still somes MAX V2

Post by Khayrisill »

Hi everybody,

I finished building my printer last september. After somes upgrade and learning I decided to take some pictures for you guys.
I installed an homemade heat spreader under the glassplate and a PEI sheet o the glass. I upgrade the hotend for a PrometheusV2 and I build an enclosure for my crazy white ABS. Have changed my stock cheapskate carriage with my own SLS set, because my two sets have broken where the screws are...

My Rostock MAX V2
[img]http://img4.hostingpics.net/thumbs/mini_749389IMG3542.jpg[/img]

Printing ABS White, cannot have parts without curling with this one.
[img]http://img4.hostingpics.net/thumbs/mini_735617IMG3539.jpg[/img]

SLS carriage
[img]http://img4.hostingpics.net/thumbs/mini_703917IMG3545.jpg[/img]

[img]http://img4.hostingpics.net/thumbs/mini_204192IMG3546.jpg[/img]
Post Reply

Return to “Show us your machine!”