My OPTIMUS-4G 3D Delta Printer

[Khalid Khattak]

Here is pictures of my new Optimus-4G 3D printer...

[Eaglezsoar]

Looks good as a first printer. The lack of a heated bed limits you to PLA but I am sure that you knew that.
Good build!

[Nylocke]

Missing heated bed? Am I missing something or is that not an Onyx?

[Eaglezsoar]

Missing heated bed? Am I missing something or is that not an Onyx?

You are correct, I didn't look that closely, now that I do it certainly is an Onyx.
Thanks for correcting me and my apologies to Khalid Khattak.

[Nylocke]

Those eyes of yours not what they used to be?

[Khalid Khattak]

Thanks guys ...i never printed with PLA so heat bed is must for ABS.. here i am printing Heat Bed adjustable supports...

[Khalid Khattak]

and this is my second printer..all the green parts for this printer were printed on my first printer

[Eaglezsoar]

Those eyes of yours not what they used to be?

At 62 it is a lot more than just the eyes!

[Eaglezsoar]

and this is my second printer..all the green parts for this printer were printed on my first printer

Excellent design work!

[626Pilot]

That's cool. After two kits from different vendors, I need to build my own printer someday.

[AndyB]

I've been watching your build comments for a few months now. You are impressive, and so is your printer. Looking forward to seeing your creation when it starts printing.

[Khalid Khattak]

626Pilot.. I never purchased a Kit... My first 3D printer was named as DELTA-1 ( You can see the making thread in SeeMeCNC forum)..That printer was made using my homemade CNC machine.. Now making this second one Optimus-4G is made with the help of CNC machine and Delta-1....
Delta-1 never failed... It gave me excellent results i always use ABS and so far its printing excellent... Optimus 4G will be much better in precision in speed. I will suggest you to shift toward Magnetic joints (arms+effector)...what an ease to work with...

[Khalid Khattak]

Thanks AndyB and Eaglezsoar ...
I hate when it take time to complete ...

[Khalid Khattak]

My direct drive extruder variant ready to be 3D printed...