My Solidworks Files

http://solidworks.com
Post Reply
bubbasnow
ULTIMATE 3D JEDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

My Solidworks Files

Post by bubbasnow »

i got 2013 up and running on my windows 8.1 machine.

Ill upload things I make to this google drive folder.

Has anyone else made anything cool?

https://drive.google.com/folderview?id= ... sp=sharing
bubbasnow
ULTIMATE 3D JEDI
Posts: 1064
Joined: Fri Aug 02, 2013 4:24 pm
Location: Dayton, WA

Re: My Solidworks Files

Post by bubbasnow »

breadboard mount.sldprt uses this board, and mounts it at an angle and fits into the open slots between x and z. its also close to the power supply extra wires so you can bring up power for electronics.

http://www.radioshack.com/product/index ... Id=2734155

fanmount and rambomount.sldprt are a fan + spacer for rambo. i used an old xbox fan.

mm3.sldprt is a scaled outline to the minuteman 3 ICBM rocket i found in a newspaper on base here.

screwend.sldprt is something i made to sit on the adjust screws, so it always presses on the same spot on the micro switch. I was having issues where a quarter turn the head of the screw would hit the switch in a different place...which would cause me pain. while calibrating after you turn the screw just slide it back over the head and adjust again :)
Post Reply

Return to “SolidWorks”