Page 1 of 1

Orion Repair Manual

Posted: Thu Aug 14, 2014 9:18 pm
by Hank106
Is there a manual available for typical repairs the Orion requires? Even just an assembly manual would be helpful for disassembling to fix something.

Re: Orion Repair Manual

Posted: Thu Nov 27, 2014 12:07 pm
by Eaglezsoar
Hank106 wrote:Is there a manual available for typical repairs the Orion requires? Even just an assembly manual would be helpful for disassembling to fix something.
There is the Orion Users Manual V2 located here: http://forum.seemecnc.com/viewtopic.php?f=65&t=4186" onclick="window.open(this.href);return false;

Re: Orion Repair Manual

Posted: Thu Nov 27, 2014 1:04 pm
by geneb
That's the user's manual Eagle, not an assembly manual.

g.

Re: Orion Repair Manual

Posted: Thu Nov 27, 2014 2:26 pm
by Eaglezsoar
geneb wrote:That's the user's manual Eagle, not an assembly manual.

g.
Thank you, now fixed.

Re: Orion Repair Manual

Posted: Tue Jan 03, 2017 6:58 pm
by rurwin
Since there isn't a repair manual, would it be possible to put together a post describing the differences between the Orion and the Max V3? It doesn't need excruciating detail, just notes on how they are similar and different. They both use Rambos, but are the extruder and the hot-end the same? If not, what are they called so we can look up the specs and details ourselves. That sort of thing.

Re: Orion Repair Manual

Posted: Wed Jan 04, 2017 2:01 am
by Jimustanguitar
They'll both have the same control board, steppers, extruder, carriages, etc. The main difference right now (aside from the build volume), and one that I'm sure will be updated soon, is the accelerometer board and the new hotend. An Orion today does not have those parts, as far as I know. Aside from the HE280 assembly, they're pretty much the same machine in two different sizes. There are some assembly and cosmetic differences, but they have almost identical component and feature lists.

Re: Orion Repair Manual

Posted: Wed Jan 04, 2017 2:28 am
by rurwin
Thanks. That's exactly what I wanted.