Using the 7 point MatterControl calibration output in other apps (Cura)
Posted: Sun Mar 31, 2019 8:08 pm
I was having lots of issues. (my max2 PRINTER. Not me personally)
so I fixed a bent heat bridge, and carefully went step by step through the MatterControl based calibration wizard. I've always used the 3-tower script that the guide walked me through originally.
It turns out, MC has an excellent 7 point wizard that gets a great bed leveling! yay!
The thing is, I don't particularly like MatterControl for slicing - I've been digging on the Ultimaker Cura infill and support settings.
Is there any way to take the software leveling that MatterControl walked me through, and applying it to other apps?
so I fixed a bent heat bridge, and carefully went step by step through the MatterControl based calibration wizard. I've always used the 3-tower script that the guide walked me through originally.
It turns out, MC has an excellent 7 point wizard that gets a great bed leveling! yay!
The thing is, I don't particularly like MatterControl for slicing - I've been digging on the Ultimaker Cura infill and support settings.
Is there any way to take the software leveling that MatterControl walked me through, and applying it to other apps?