V2 upgrade

Discussions related to the Rostock MAX v2
Post Reply
Posts: 1
Joined: Sun Sep 27, 2020 9:06 pm

V2 upgrade

Post by Ghostflyer53 »

Currently have a Rostock Max V2 with the following upgrades:
- Bondtech QR Dual Extruder
- E3D V6 Hotend
- Capricorn Bowden Tubing

I would say that 90% of my prints are/will be PLA.

I am looking to upgrade the hotend cooling fan and have a couple questions. First the V2 has a single 40x10 fan, would it be beneficial to go to a 3 fan system? If not, would it be best to go up in size to something like a 50x10? Or would it be better to go away from the centrifugal style fan and use a computer cooling fan that doesn't duct air from the side?

Plus, if there are any STL's that would work with the recommendations would be greatly appreciated. I am still learning the design side of the house. thank you.
Post Reply

Return to “Rostock MAX v2”