Extruder motor does'nt start

Forum for all things related to Simplify 3D Software
Post Reply
Khayrisill
Printmaster!
Posts: 69
Joined: Thu Aug 25, 2016 9:09 am
Location: Montréal, CA
Contact:

Extruder motor does'nt start

Post by Khayrisill »

Hi everybody !

Something weird with S3D, when i launch the build the extruder motor does'nt move. I can move manualy thru the control panel. And its works perfevtly with mattercontrol.

Someone has one idea ?
User avatar
KAS
ULTIMATE 3D JEDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: Extruder motor does'nt start

Post by KAS »

Under the FFF settings, which "Extruder Toolhead Index" do you have selected? I believe default is Tool 0, but you can try the others to make sure. If you can move the extruder through the S3D control panel, then just make sure it matches the "Active Toolhead" listed on that screen.
Khayrisill
Printmaster!
Posts: 69
Joined: Thu Aug 25, 2016 9:09 am
Location: Montréal, CA
Contact:

Re: Extruder motor does'nt start

Post by Khayrisill »

Tool 0 is selected. nd i see nothing in control panel.
User avatar
KAS
ULTIMATE 3D JEDI
Posts: 1157
Joined: Thu Dec 04, 2014 6:06 pm

Re: Extruder motor does'nt start

Post by KAS »

Here is the location in the control panel.
Untitled.png
Khayrisill
Printmaster!
Posts: 69
Joined: Thu Aug 25, 2016 9:09 am
Location: Montréal, CA
Contact:

Re: Extruder motor does'nt start

Post by Khayrisill »

I just restart everything. Know it works. Tool 0 is selected.
Thanks KAS.
Post Reply

Return to “Simplify3D”