Rostock MAX v3.2 Settings

Forum for all things related to Simplify 3D Software
Post Reply
User avatar
jcarlin
Plasticator
Posts: 16
Joined: Fri Aug 04, 2017 8:23 am

Rostock MAX v3.2 Settings

Post by jcarlin »

Been working on this Rostock Max v3.2 FFF for Simplify3D and I am pretty sure its just about there. I took a mix of the standard Simplify3D profile for the RMAXv3, the proposed settings for Cura from SeeMeCNC and the settings for the Artemis. It prints very nicely on my freshly upgraded v3.2. You might need to tweak the temps for your own liking.

I also included a bonus! Messing around I figured out how to add the Rostock base under the build plane. The .stl and where to put it are included in the zip file. Move the file into place before you import the FFF.

Example image: https://drive.google.com/file/d/1gwIcXZ ... sp=sharing

Files:
RMAXV32_SIMPLIFY3D.zip
(800.08 KiB) Downloaded 271 times
Enjoy!
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D
User avatar
jcarlin
Plasticator
Posts: 16
Joined: Fri Aug 04, 2017 8:23 am

Re: Rostock MAX v3.2 Settings

Post by jcarlin »

I have a new version of my S3D FFF for the v3.2...

Spent most of the day tweaking the settings until I virtually eliminated my stringing. Still dialing everything in, but thought I would share my work in process.
Attachments
SeeMeCNC Rostock Max v3.2 version 2.fff.zip
(3 KiB) Downloaded 295 times
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D
geneb
ULTIMATE 3D JEDI
Posts: 5362
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:

Re: Rostock MAX v3.2 Settings

Post by geneb »

Keep in mind that stringing is going to vary from roll to roll.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
User avatar
jcarlin
Plasticator
Posts: 16
Joined: Fri Aug 04, 2017 8:23 am

Re: Rostock MAX v3.2 Settings

Post by jcarlin »

Hopefully the profile will give others a starting point. Though I was getting consistent stringing across all of my PLA and PETG rolls. My latest settings seems to have eliminated 99% of it. YMMV
R-Max v3.2 (upgraded)
Powerspec Ultra


Simplify3D
Post Reply

Return to “Simplify3D”