Unable to print Stretchlet in Matter Control

Post Reply
h4lt
Plasticator
Posts: 15
Joined: Sun Sep 11, 2016 9:52 pm

Unable to print Stretchlet in Matter Control

Post by h4lt »

I just finished building my Rostock v3 last night and I was able to print a number of things (boaty, fossil fish, and vase), but for some reason I cannot print a stretchlet. I add the stretchlet.stl to my printer queue, hit print, my bed + nozzle heat up to the correct temperature the hotend lowers to attempt the print and resets to zero. The one thing I noticed when I got to layer view is that this particular print did not have any layers associated. Is that my problem?

File I'm trying to print:
http://www.thingiverse.com/thing:13505/#files
Xenocrates
ULTIMATE 3D JEDI
Posts: 1561
Joined: Wed Sep 23, 2015 2:55 pm

Re: Unable to print Stretchlet in Matter Control

Post by Xenocrates »

I believe it's the minimum feature size. Take stretchlet1.stl, set it to no top or bottom, and also vase mode. That should do something.
Machines:
Rostock Max V2, Duet .8.5, PT100 enabled E3D V6 and volcano, Raymond style enclosure
Automation Technology 60W laser cutter/engraver
1m X-carve router

Sic Transit Gloria Mundi
01-10011-11111100001
h4lt
Plasticator
Posts: 15
Joined: Sun Sep 11, 2016 9:52 pm

Re: Unable to print Stretchlet in Matter Control

Post by h4lt »

Xenocrates wrote:I believe it's the minimum feature size. Take stretchlet1.stl, set it to no top or bottom, and also vase mode. That should do something.
Thanks. I'll try that tonight.
Post Reply

Return to “MatterControl”