Tolerances

Troubleshooting topics around resin based printing
Post Reply
telteknv
Noob
Posts: 4
Joined: Sat Aug 23, 2014 10:33 am

Tolerances

Post by telteknv »

If I make a ring the is 1" od with .8" id x .250" thick. What can to tolerances can expect? Machine is a Orion Delta
whoisjoecarr
Plasticator
Posts: 7
Joined: Sat Aug 02, 2014 1:16 pm

Re: Tolerances

Post by whoisjoecarr »

I can't speak directly about the Orion (yet) but with FFF machines I typically keep a tolerance of about 200 to 400 micron. It might be better to post the question in the Orion section though.
telteknv
Noob
Posts: 4
Joined: Sat Aug 23, 2014 10:33 am

Re: Tolerances

Post by telteknv »

Thanks

I thought I had posted it on the Orion Group. I am new to the group so I have feel my way around a little.
Post Reply

Return to “Troubleshooting”