Welcome to the SeeMeCNC Community

Hello Steven, First, I would like to thank you for your awesome program for calibrating the Rostock V2. So quickly the printbed to get straight is amazing !! Thank you thank you thank you!!!! Unfortunately, I defy a small but serious problem. my printed parts are too small. if I want to print a cube ...

hey guys, thanks for your answers! but the problem is still the same.... print a cube 50x50x50mm, the print is 49,5x49,5x50mm! bevor the crash, my parts are 100%...
never had this problem before (i think). its sirious.... i really dont know whos the problem....

Hey guys! after hundrets of prints.... kilometers of filament, it was time for a little revision of my Rostock Max. At my last print the machine got a little issue and crashed "INTO" the glass Plate... AAAAAAAAHHH!!!! Plate brocken... but nothing more... ithougt..... Bought new parts (Glass Plate ...

hope i dont need so much for dual head and support setting tests...

Hello :) back again from a looong calibrating journey... but i have really good news! the printer works now!!! what i have done: 1: Clear the EEPROM!!!! 2: Load the Firmware again - seems to work now correct :) 3: construct with solidworks a new calibration tool to check my angles and wides from the ...

hello, Back again :) the things that i do last time: 1. flash new firmware on Rambo (the link that you send me) 2. changed the "Z" high on "new" firmware, 3. Check bed leveling-ok make a new testcube 10x10x10mm and get 8,7x9,0x10,06mm... btw.... i print ABS 1,75mm black with 240C. THANK YOU FOR YOUR ...

i download from here: https://github.com/seemecnc/Repetier-09 ... ROSTOCKMAX

Hello,
NO, i download the 0.91 Repetier and installed it on the board. On the Rambo that comes with the Kit is Version 0.83 pre installed from SeemeCNC. The Kit was bougt at 13.02.2013 and arrived me last week.

sorry, dont understand..
i check the Carriage horizontal offset and change it from 35mm to 38mm, also correct the printer radius from 198,25mm to 200,7mm in cofiguration.h file.
but nothing happens... became exact the same cube.... wondering... wondering...

i found the problem!! :) geneb´s tip was the right way... the themprature wasnt correct... must heat to 250 Celsius to extrude and my printthemperature was 240.... so it cant work.... beginner fail.. i think :) Thanks for your tips!! but now i have a new problem.... the diameter from print are not ...

Hello. i build the last few days my new Rostock Delta Max. everthing is fine in im very pleased about the good parts!!!!!! this day, i plug the printer first time on Power and calibrate the Platform, heaters.... now i want start my first print (calibration cube) and got the first really big Problem ...

hello all. i have some little problems with the 0.91 Repetier Firmware. Bevor i bought a complete Rostock Max by SeemeCNC i ordert a single Rambo controller and 2 type of displays. The First is a "normal" Display who is also include by the Delta Max - This Display woks without any problems with ...

Happy new Year to all :) I want to buy your Delta printer, but do not know for what I decide. Orion or Rostock Max.I want this printer for my business use (http://www.franconiarobotix.com) because I have my robot arms some parts to print. Until now I use a Delta Micro UP!! Printer. The most ...