Welcome to the SeeMeCNC Community

I was finally able to print after exporting the independently generated G code. Now all I have to do is fine tune the printer to get rid of some problem areas with the printing. Thanks for all the help. But that will have to wait as I have to leave the country for a few days.

Ok it seems like renaming everything again and exporting the gcode worked this time. I will test this and hopefully I am able to print something finally. I will follow up with my results.
Thanks again.

I opened the Slic3r independently and changed the settings and exported the gcode. I opened it up and it still says 200 degrees. I think I will try another slicing program. Hopefully it will work better than this.

G21 ; set units to millimeters M107 M104 S200 ; set temperature G28 ; home all axes G1 Z5 F5000 ; lift nozzle M109 S200 ; wait for temperature to be reached G90 ; use absolute coordinates G92 E0 M82 ; use absolute distances for extrusion G1 F1800.000 E-1.00000 G92 E0 G1 Z0.350 F7800.000 G1 X-12.500 ...

Michael
Thanks for the reply. I checked the g code and it is definitely overwriting with 200. I am including the G code as well as A screen shot because I cant select the print setting, printer settings or the extruder 1 settings as they are grayed out.

I have completed my construction of the Rostock Max as per the manual and have followed it to the letter for the software setup as well but I cant get Slic3r to work properly. I am trying to do my first print the calibration cube but every time I hit start job, the printer drops the extruder temp to ...