Welcome to the SeeMeCNC Community

Hello! I've added the Laser On and Off code option. If you use repetier - just leave M03.
The new version - https://www.dropbox.com/s/ihtobq7o49845 ... r.rar?dl=0

That looks good, but I don't see what is required to acquire the measurements. What do I need to get for that? Sorry I don't understand what do you mean. I'm from Russia and my English is not so good as yours. This is not the program for auto-calibration this is the program to manually calibrate ...

Hi everyone. I've written a program to measure the height map of our delta printer print bed. Tested with repetier 0.92.8 firmware. [img]http://s014.radikal.ru/i328/1601/15/86ebd477d049t.jpg[/img] Herer is the program https://www.dropbox.com/s/zxyymrott81z4ub/Delta_heightmap_Repetier.rar?dl=0 Choose ...

JFettig wrote:Awesome! What kind of output does it require and will it work with pwm to adjust the intensity?

I've added the information to the first message. sorry for my bad English - I'm from Russia.

Hi everyone. I've written the program to convert images to g-code for Repetier. Tested with 2w 450nm laser on Rostock max with 0.92.8 firmware. Now I've got good prints on leather, pcb(painted with black paint), paper and other materials!!! [img]http://s019.radikal.ru/i642/1712/21/f36bd91bd904.png ...

hey)))I've done everything last night, had no time to share the solution. I've connected the GND to the GND pin of Analog-EXT(pin2), +5v to VCC(pin1) and signal to pin7(PK0 ADC8 of atmega) of the analog-ext on the Rambo. Now I have the 5.00V on the Board, ang 0.22V signal. I've changed the pins.h ...

with board disconnected from rambo it has 0.23v between gnd and signal outputs. But when i connect the signal to rambo, the voltage between those two is 4.83

the voltage between gnd and signal output from the themoqouple board is around 4.83V

Having problems [img]http://s019.radikal.ru/i640/1403/37/1d67769d6afdt.jpg[/img] Have connected the board to the 5V and GND from power unit, not from Rambo, and signal to the thermistor input(wich is not connected to gnd) Have the extruder temperature 481.93C with thermocouple board connected to ...

Ok thank you.I'll try to connect the thermocouple board. So 5v to board from anywhere, gnd to thermistor gnd input and signal to another thermistor input. I hope that nothigh will burn out))))

Have already read this topic - there is no answer.
The RAMBO v1.2(atmega2560) have the analog port with 5v, gnd and ADC inputs. May be I can connect it there?

Hi, I've got the Rostock Max 3d printer with RAMBO 1.2. I've installed the e3d hotend and bought the External Thermocouple board ver 1.1b with AD597a for my type K thermocouple. Does anyone knows how to connect the thermocouple amplifier to the RAMBO? And what settings should I set then? Sorry for ...