Welcome to the SeeMeCNC Community

Nozzle works great! I have just completed a part that always failed at nearly the same region of the print, this time worked just fine. I just need to work on the retract and some other settings to get things dialed in. Finally some success!

I just got the modified the nozzle back from mhackney and I repeated the plug measurement so I could see the changes to the length but also the angle.

The top is the before, bottom is after the adjustment.

I sent mhackney my .4 nozzle to get modified. I did not trust myself to adjust it such a small amount. Also I wanted to have it adjusted in the same fashion to help reproduce the results. I had measured the plug to be just over 1mm. Do you still have that piece of filament you used to make a test ...