Welcome to the SeeMeCNC Community

Thanks Bot and Tinyhead, I thought it might be due to ambient temperature fluctuation so I covered the entire print area with plastic sheets to attempt to stabilize the print area temp and drafts, but I get the same result. I get very good adhesion on the right side, so maybe the print bed is not ...

Hey Tinyhead, How ya doing ? I did some more printing. I seem to get pretty good results with small parts, but the big parts are all curling at the ends. Actually curling a lot. What are you using for your heated bed temp for ABS ? What if anything do you use for sticking things to the glass ? Do ...

So here is the update. I tried to change the temp to 230, then 235 with the same result. I started looking at the default settings in Repetier and found that the filament was set to 3mm. When i changed it to 1.75, it would not save. Frustration continues. But, I took the lead from you and downloaded ...

Interesting.

im not at home right now so i can't check those values, but i only ran it at 220. I bumped that up from the slicer that only wanted it to run at 200. I did attach a peek fan though, so i think i will bump up the temp and try it again.

thx

j

oops, i somehow posted the pic several times

Oh Sweet !

That would be great.

Stringy everywhere. It has the correct form though.

Here is the pic.

I am from Winnipeg, home of the jets....and nothing else, unless you like snow taxes and mosquitoes. I think I have solved the calibration problem, as we'll as the extruder motor problem. Finally I started to print the fan shroud. The first time it was not recognizable (I think the hot end temp was ...

Hello all,

I have just finished my build for the Rostock Max V2. I tried to calibrate it last night, but could not get it right. I have read a bunch of the posts today, so I will try to calibrate it again tonight. Wish me luck.

Is anyone else using the mac version of Repetier Host ?

J