Welcome to the SeeMeCNC Community

Didn't realize another firmware existed. I'll check it out and see if anything changes. Thanks. http://forum.seemecnc.com/viewtopic.php?f=54&t=1046 Edit: Updated using the Repetier firmware found here: https://github.com/seemecnc/RepetierMAX/archive/master.zip Works fine now with steps/mm set to 53 ...

Having some trouble with my Rostock MAX. Regardless of what I set my Z_HOME_POS to in configuration.h or Printable Height in Repetier, any G-Code input for the Z-direction causes the extruder to crash into the bed. For example, say my Z_HOME_POS was set to 345 and I homed it with the command "G28 ...

Update: Still haven't gotten a PSU yet. To test it, though, we plugged it to a car battery with a fuse in between. To our surprise, the 10A fuse did not blow; we were expecting the combined heating of the heated bed and extruder to consume more amperage. Anyway, the extruder and heated bed work fine ...

Will definitely take a look and give it a try. I should be able to find a spare 350W PSU somewhere. Thanks. Edit: It so happens that one PSU was disassembled for parts and another was used to replace a dead one. Going to try using the Mach3 demo to see if it's a software issue while I wait for a ...

My brother and I ordered the H-1.1 w/ RAMPS 1.4 from the Indiegogo campaign and finished assembling it back in September. Over this past Thanksgiving weekend, we've been trying to calibrate it but have been running into a few (possibly related) issues: The extruder works fine when the bed is ...