Welcome to the SeeMeCNC Community

Yeah, problem is I cant find anything 17x17 which is essentially what I need for my gmax 1.5xt+/ Right now ive just got 2 pieces of pei, so there is a seam, but i doubt it will matter much, so maybe ill just stick with that

ask and you shall receive michael https://www.lulzbot.com/store/parts/lul ... -pei-sheet

i just looked through that entire thread and counldnt find a link to the customer PEI sheet.. any chance you could dig it up for me? my printer bed is too dang big haha

Michael :) long time no talk haha.. anyway, i am finding more and more (after re ordering this adhesive 5-6 times) that i can not reliably get it off the sheet, or the tape (1") without massive bubbling or globbing. it always happens, without fail. Is there any tips you use? I can usually get a ...

I will say, i havent played with my CNC lately (since i put it on a winch). But I do now have a 3.8w laser attachment too... SOOOOOO cool.. it can cut and engrave etc.. this MPCNC is so flexible in what it can do.

Good morning gents and ladies :) I havent been on the boards here for a while as I no longer own my max v2... Ive always been a fan of the community here though. So i thought id chime in (not to hijack). This MPCNC this is FOR REAL. I just finished mine a couple of weeks ago and its fantastic. It ...

I cant say 100% you will get it, but I can tell you what I have is working REALLY well for PLA for sure. I think now its more about cleaning up the process and making it visually production ready

Just revisiting this thread in case anyone is still interested. I am doing some testing for these guys and the PLA works amazingly well, and right now im being provided some new stuff in the mail soon, for ABS etc. Right now the ABS test plate ive been given, if you apply some glue stick juice it ...

so that didnt work... im wondering if its this filament, because the other stuff i was using originally to test worked... would one PLA adhere that much better than another? i mean its a 25mm cube, not a big part... i guess ill test that next. EDIT : so the filament change didnt work... still warped ...

so im trying a new pad with the ISO... when i read the recent posts, i thought "ive been using the same paper towel for days" so its no mystery if that is the issue. so we will see. for ABS particularly, I could just sand down the glossy side and use my 2nd piece of glass for glossy PLA later.

quick question folks... can i put hairspray or more likely glue stick on top of the glossy side of PEI for use with ABS? i have some parts to print, but i wont get my new sheets until monday. Right now i have the glossy side 3m'd to the glass. thanks edit: i am having a HORRIBLE time with adhesion ...

that is UNREAL guys... very cool.. am i correct is assuming the detailed parts were printed face down as panels and glued in to place?

this is 100% plastic in the drum, just a rubber gasket on the end that screws off. but yeah, ill try those things first

quick question.. I have a cheap tock tumbler... I put in brasso (i know, wrong move) and it is SUPER dirty. I cleaned my stainless media, and thats all good. but now i have a film on the inside of the plastic drum... It has no markings to determine the type of plastic, so im not sure if i can use ...

yeah that may be the ticket.
thanks

you should get a referral check bought and paid haha

is the shot available on amazon? i am searching for a lot of things, but cant find anything close.
thanks

by shot you are just meaning like shot for shotgun shells right? i use drywall nails in my tumbler, but im sick of that because i get a ton of black flecks invading my prints.

are you talking about using a rock tumbler for sanding and polishing the copperfill ? those pillars will not survive it IMO

Did you ever finish your copperfil reel? or what were those rings you were printing out for? your reels are amazing.. i love the teal and clear one...
that vector map code sounds really neat, you could do just about anything with that

I would really love it if s3d had more infill options. its pretty contraining as is. i love some of the honeycomb looks etc.

I think s3d is amazing, compared to ALL other slicers out there.

I never mentioned it, but this print has had ZERO touch up. not one bit of sanding, or picking.

Michael, its actually the gold (standard gold i think) from Inland, sold on micro centers website.. $15 a roll... cant beat that.

I havent inquired... If i need to ship it, i assume ill have to just take the axis arms down, then it should compress well enough to get in a decently large box
others have sold them on here before, so im sure they are shippable somehow

yes. PLA. im starting to print more PLA. historically ive been very abs focused.

Looking at a lulzbot taz5. Im not upset with the rostocks volume at all, but the circular nature of the bed means I cant print these four rectangle parts that i need to. I can do 4x items on the taz with only slightly larger bed, because of the rectangle nature of it.
thanks