Welcome to the SeeMeCNC Community

Ben, To increase flow rate you need more heat into the plastic per second.. so you either increase the thermal gradient and thus flux (by turning up the heat) or you give the plastic more time to reach processing temperature. Under normal printing circumstances the plastic will come within 5dec or ...

E3D Volcano is a super high flow add-on pack for E3D HotEnds using a long melt zone gives the plastic a longer residency time in the hot-zone so that you can print thicker layers at high speed with better strength! [img]http://e3d-online.com/image/cache/data/volcano/Volcano-Parts3-1000x1000.jpg[/img ...

0110, Cheers for pointing that out, I forgot to add a link to it!

Have edited my original post to contain the link..

Drawings are now available as promised - they will all go up on the documentation pages on our website soon.. Cyclops Assembly Chimera Assembly Cyclops/Chimera Cooler Block (Air) Cyclops Heat Braek Cyclops Heater Block (2in 1out Switching HotEnd Block) Cyclops Nozzle (0.4mm) The Chimera uses Kraken ...

Someone posting here is close enough to get a free Volcano upgrade! I will message you when it's out - but at that point you will know who you are anyway.. :P I will do the drawings today and put links on the product pages and here. Retractions on Cyclops; a 1.5mm retract during printing and 2.5mm ...

I have just been sorting out the assembly drawings today. These are not quite finished from an ISO8888 standpoint, but it should give you all the information needed to start designing mounts etc.. I will be doing the remaining component drawings and uploading them over the coming week. Chimera ...

Hi Everyone, Josh here from E3D, I've not posted here before, but been a lurker for a while.. ;) Volcano compatibility was actually not supposed to be listed on that table (oops!).. But now everyone has noticed it seems a bit pointless to take it down. I can't tell you what Volcano is because it's ...