Welcome to the SeeMeCNC Community

It took me long enough but I finally got the upgrade working.

Thanks everyone for your help! I really could not have finished the upgrade without your all's help.

SSR and heatsink ordered on on their way, thanks for convincing me not to burn my house down.

Question: Given that it is 24V 350W 15A would it be better / easier / safer to get the Onyx Rev 3?

Using an SSR necessarily requires me to use two power supplies?

Also, if I do use two power supplies can they both still be 24V?

I'm completely overhauling my Rostock Max v2 from stock to: duet 0.8.5 e3d v6 24v 24V 350W power supply Injection Molded Cheapskates Tricklaser carbon fiber arms Heat sinks on all of the stepper motors I'm going to use the 24v power supply hooked directly to the duet. I plan on putting a fuse inline ...

I resolved the issue by reverting back to the stock firmware (0.91). What I found was I am having an issue with the heater manager EXT0_HEAT_MANAGER in 0.92.3, I had it set to 3 which is the Dead Time controller. When I tried setting it to 0 (bang bang) or 1 (PID Control) the temperatures became ...

I found a discussion of "Heater Decoupled" at http://forum.felixprinters.com/viewtopic.php?f=7&t=1093 . From the other forum: My understanding from the Firmware Extruder.ccp file is that during 'Printer::isPowerOn' it will seek the minimum temperature rise (see attached), which in our case is set in ...

Before making any changes I tried setting the temp to 230C, it got to about 223/224C and stopped. If I set it to 200C it hits 200C. I tried 210C and it almost got above 200C. I tried lowering the Kd from 127.98 by 30% to 89.58 and the Ki from 2.98 to 2.69 (10%) but I had the same issue. If I tried ...

So I've been leery of trying to set it above 225C, but I did set it to 220C to see if it would get to that temp but it did not. I don't recall the exact temp it went to but I think it was 216 or 218C, definitely not 220C though. Edit: So setting the temp manually is one thing but when I want to ...

I've been beating my head on this for two weeks and I now humbly request help. Rostock Max v2, Rambo board, stock hot end. I had it working fine with the stock firmware. What I did: Added there FSR's to get the bed leveling and updated the firmware to v 0.92.3. What is happening: I set the hot end ...

Thanks, I think I read passed that image a dozen times without it registering what it was (face + palm).

Nylocke wrote:He machined those on this lathe.

That's cool. Any idea on the dimensions so that I can replicate?

Thanks!

Finished the FSR bed sensors for auto leveling. JohnSL's board works great, they're quite sensitive. [img]https://lh6.googleusercontent.com/-xfTcEjUo-Hw/VEQv6q7z_FI/AAAAAAAAAaU/r9s6DOPuScg/s576/IMG_20141019_135418.jpg[/img] [img]https://lh5.googleusercontent.com/-Tt6UcGFgEK8/VEQwE-Al5HI/AAAAAAAAAak ...

For my first 3D printer I researched and decided the Rostock Max v2 was the best option. Finished building it and printing the fan shrouds just last night.

[youtube]ZetXh14cniE[/youtube]