Welcome to the SeeMeCNC Community

Recycled with an included 12v pump.

Nice work on the mount, quite glad that all of the top holes clear properly!

Mounting it... I'm hoping things line up to allow the filament to go through the center of the carriage with minimal offset. The spacing is going to be tight though, most likely going to need to use the side holes for the water cooling barbs.

Found this blog about 4 color printing with a beta Kraken reported 1/4/14. Has some great photos and discuss of his mechanical and electronic setup. Good reading while we wait. Saw that, great writeup but I wish there was a follow-up post as the result was a bit less than optimal (but expected as ...

hows, did we get you taken care of? It was prob. me that replied to your email. Yeah, between the miserable midwest weather we've had and traveling to LA this last week, I've been doing all the emails in the AM Sorry, didn't get a response from you guys. Just sent another email so hopefully you can ...

Sounds good, I saw something in the announcements about them visiting some convention so maybe that's it. Not in a huge rush but I definitely want my 2nd extruder going when my kraken shows up! Wow! You bought a Kraken! I'm jealous. Be sure to let us know how that works out for you. I'm stoked ...

Sounds good, I saw something in the announcements about them visiting some convention so maybe that's it. Not in a huge rush but I definitely want my 2nd extruder going when my kraken shows up!

Hi guys, Don't post here very often but I recently (Monday evening) sent an email to [email protected] and haven't heard back. I'm missing a few parts from the EZStruder kit. Alternatively, anybody have the models for parts EZStruder Adapter Hanger (P/N: 70778) and an EZStruder Adapter (P/N ...

Where from?

Issue #1 of reprap magazine compares these two plus Cura, seems like they each have their strengths like Flateric mentioned.

http://reprapmagazine.com/

Was looking around to see what was in my area and look who I found:

http://www.makexyz.com/printer/geneb?pr ... 345676b8cf

I did a quick "fun" print of a 50% yoda with big 0.4mm layers cause I was strapped for time, turned out pretty good for first non-cube print. Away for the weekend but I'll start poking around and just doing some prints with various settings. I'm pretty pleased as it stands, just need to get that ...

Calibration helped quite a bit, but I'm still getting this weird pattern on one of the corners. See below, interations from left to right like before: [img]http://i.imgur.com/Aps0eihl.jpg[/img] (Click for big) [img]http://i.imgur.com/pz9rtf0l.jpg[/img] (Click for big) #5 (Left) - Decreased temp to ...

Sounds good, I'll try those two out this afternoon and see what I come up with, thanks!

Long time lurker, finally got my Rostock up and printing today! I've been working through some hollow calibration cubes and things are looking pretty good. What's shown below are prints number 2,3,4 (left to right). Notes included, but I'm not sure where to go next. [img]http://i.imgur.com/2ow3eVYl ...

It's been great reading through this thread so far, thanks for doing it!