Welcome to the SeeMeCNC Community

What about the opposite, freeze the bearing. Would that be bad for the lube? - Old techie trick freeze a noisy clicking harddrive to get data off it.

2nd on the connectors. Belt tension too In a haste to get the thing running I twisted my extensions and did pin swaps. Each time I had chatter it was wiring. All extensions are soldered now. This even happened on the extruder, which I thought was jammed. Of note: If you remove the belt (achieved by ...

Make sure you go back to the original wiring as well.

Aloha First off, in between all changes, we were very paranoid and closed repetier, powered Rostock off - then on, relaunched repetier, then hit the reset button next to USB port, . It would probably suffice to just reset but we wanted to be "val" fer shure-fer shure ya knouw. Try resetting to clear ...

Gave up on the wiring and went back to the original wiring and used the software fix. It works now. It wasn't too hard but finding all the documentation in one spot was tough. I'm working on a guide for that. I do not recommend flipping wires, it caused some strange problems.

Aloha - Noob here This is my first 3D printer I love the kit and it's all built. Excuse the long post I'm trying to include all pertinent info: I am good with computers and mechanical things but this is really baffling. I got my kit on the 16th (I'm not with the printer or box so I'm not sure when ...