Welcome to the SeeMeCNC Community

Awesome!! Looks like that took care of the problem. I was really hoping it was going to be something as easy as this rather than taking stuff apart or getting replacements. Thanks so much!!

Yes, the cheapskates go all the way up or down when powered on. Mine were initially going down, but I realized they were inverted and fixed this, but they then go all the way up. I am running Arduino IDE 1.6.1. I have uploaded EEPROM several times each before I try to upload the Repetier firmware. I ...

I used the link in the instruction, but just to be safe I used the link you provided. I went through the same steps and uploaded the firmware. As soon as this was done the hot end began to move toward the hot bed just like before. One thing I did not previously mention was that when the LCD first ...

I have just recently finished building the Rostock Max V2 3D printer, but I am having issues since loading the firmware onto the Rambo. When I initially loaded the firmware and turned the printer on the hot end moved to the hot bed and ran into the glass before I could catch it. I realized I had an ...