Welcome to the SeeMeCNC Community

oh...lol thanks...i totally forgot when i first installed the printer and to upload the eeprom the whole configuration H script was actually an editable controller like a css layout file or a config file for a network site install but for the printer...wow i havent done websites in 5 years since i ...

Eaglezsoar, i read thru the thread after clicking the link and with no luck. i wasnt able to find anything resembling configuration H. maybe i over read the thread...i read thru both pages... but i do want to thank you in advance for the help. i am currently trying to print out a couple different ...

hey whats up, i have the same problem..it just started happening like a week ago but i haven't done anything to my machine since i put my MAX V2 together over a year ago and it has always printed superbly.. my diagonal rod length is 269 please tell me how to re-calibrate the arm length like you have ...

regardless of what the rules say...i dont mind at all....and because we were talking about it..newbies that come across this thread and do download it should definitely be able to come back here to where they know they can view the tutorial and use it.. but as for me i wont be able to use ds ...

It does generate great STLs. I'm working on a video tutorial as we speak. I'll post the first installment in the next week or so.[/quote] ////////////seriously...i tried it after downloading the free version...it seems easy but then the repair feature freeks out or i just really am clueless at what ...

well im definitely not asking you to walk me thru it....just this one problem is really bothering me and as for other tools..as long as they are free im for it...but sketch up has tons of plug ins/ extensions that make stuff really really easy... Also, Geneb thanks for the heads up and i only have 1 ...

Jimustanguitar = thanx im tying the one you fixed right now....ultimately i would definately like to figure out how to figure it out myself because SEBRET, when you say that "all i did was reverse the faces so the good ones are flipped"....the thing is...the misprint happened across all of the boxes ...

ok so i reversed faces and regrouped and exported...so please if you would let me know what it says in repetier if you would please...
thanks

how do you figure

so in sketch up i need to just normalize the faces and thats it...


i wish i could upload a pic so that the problem could be seen

thanks.

ok...i was having issues with trying to attach a photo and i will try an stl file now


whoop there it is...hehehe

thanks for checking....bye the way, is there a way to upload a pic without having it hosted beforehand?

ok i created something in sketch-up 2015 and the model looks great when i'm getting ready to print it in matter control... but as the title to this thread insists "My STL created in sketch up '15 is starts out good, but then" ugh what a pain in the walnuts!!! well i don't think its matter-control ...

i am trying to post a problem on the board ...but as it turns out...lol, i am having difficulties doing that as well... is there an issue with that lately? when i click the add file button in the editor it goes to a blank page and never loads. if i then hit back it goes back to the editor for the ...

in a quick update I'd like to correct my erroneous mention of not having to turn off the a/c just because of the pei polymer sheet...turns out anything over 3 inches radius from the center and over a quarter inch in height will start to warp and then catch and rock with the direction of the hotend ...

same goes for me..but the problem is getting it calibrated once again to the exact settings that you had when you finally dialed it all in after you first put it together and achieved your first great print!!! what a pain in the but! but (no pun intended) i managed to do it like this.. 1: I ...

hello all....i got my max 2 this past November but only just put it together a week ago but had to wait for the abs to get here...so i started printing 2 days ago.. it actually took me about a month to build it due to health issues but i am a patient person so there was no rush...the same goes for ...

I'm building my max v2 now, (I'm at the onyx bed) and I'm concerned I may see this issue. Would it be possible to get 2 pictures of the wiring? One per the manual, and one that works if you get the chattering extruder? Thanks! Rob hi rob...first look at the brand company on the motors to see if ...

AndyB, i tried wiring the watai motor to your rewiring specs and low and behold...it works! without a hitch it worked like a charm.. i think everybody who has this problem in the future should check the brand of motor they were sent before they try this wiring config first because they instruction ...

I had to wire them into the connector exactly like the order on the other connectors. The manual is wrong. I just did this a week ago. If the extruder shakes back and forth, you wired it incorrectly. The order I used was red, green, white, black, which would make the picture on the build guide ...

my motor is a wantai and it is rocking back and forth as well...
i did try and edit the line of code but it didnt change anything...but i did notice that when i press the extrude button now with a soft assist to the manual knob the e- is the feed and the e+ is the retract.. anyone have any ideas...?