Welcome to the SeeMeCNC Community

Hello have been having a problem with the Extruder skipping. I have the Rostock V1 but upgraded the Extruder to the EZ struder years ago. I changed the extruder motor, cleaned out the Hotend, leveled, tried higher heat settings for ABS, 237 was the highest and still no luck. Anyone know where the ...

Thanks you teoman for the link! Really helped, I think it's the motors as the problem is exactly the same and everything else is good on my printer. Luckily I have 4 extra's so will likely change the Z tower motor. I've had it since the Kickstarter so I imagine 1 or more motors are going since I've ...

Thank you, yes checked that first tightened them hasn't helped, looks like I'll have to take the belts off and thoroughly check everything.

Thanks so much Ben, took each joint and rod off cleaned rods and arms reassembled, same problem.
I was so sure it would do the trick as they were almost all dirty but to no avail. Even after 2 calibrations for center and XYZ axis it still does the exact same thing.

puzzled. :/

Hello! I was printing fine, then suddenly on next print, the Nozzle wasn't moving flatly across the Onyx bed, 1st layer won't print evenly, towards Z it pushes into the glass removing some of the glue stick glue Note I have the first of the Rostocks but upgraded the Onyx over a year ago. This is a ...

I feel like a right Git wasting everyone's time. I cleaned the J-Head now everything is fine, something must have been in the filament, the jumping was caused by the blockage. Never had any blockage before after going through about 10 rolls of filament so far. thanks for all your help! That Quad ...

Thakn you! Ahh it's under movement missed it...
Mine is already -#define MOTOR_CURRENT {175,175,175,200,0}
Strange the last number is zero.

I just mounted the fan on the back hopefully no more trouble! I do another print tonight
thank you guys again!!

Thank you guys so much! I actually do have a fan on it but its mounted by the USB port pointing at the board on the other side I'll move it. I actually was running a 6 hour print before. then went to another one after 30 minutes. What code do I look for regarding the voltage? I've been looking in ...

Does this skip during printing a line or perimeter not while Travelling I only use abs. What is causing this skipping? Makes no sense. I only use Cura now as I've used others and never get as good results. It's also not printing some perimeters smoothly kind of a slow studdering After the Arduino ...

Has anyone experienced the EZ sturdier doing very quick jumps while printing where it's not needed? Mine keeps doing this don't know what's causing it. It's a quick jerking sound, the motor is turning backwards very fast then resumes. It's not retraction, my settings are about 6mm and speed around ...

Hello! I just installed an Ezstruder ( was using Steves extruder ) It's much better except it's broken filament at around the hobbed gear twice already and ruined a print twice. I have it aligned pretty good, double checked it. The Filament was working fine with Steve's extruder. The print has alot ...

Yes print the pieces as I'm still using the Steves Extruder haven't installed the EZStruder yet

Thanks all but it's no where there that I can find. I can't open dxf files also.
Thingiverse doesn't have anything that looks like the parts in the manual
Parts 70778 and 70779

I emailed Seemecnc maybe they have it
thank you!

Hello I just bought an EZSTRUDER but there was no mounting plate with it so I can't use it.

Is there an stl file I can download to print one? I have the original Side spool holder I'd like to be able to just connect the EZstruder to that.

many thanks!

Water soluble supports??? Wow never heard of that, sounds pretty amazing!

Have to see what support there is for adding this on the Rostock max, I haven't even seen a picture of dual extruders on it though I've seen the add a sturder kit.

Hey folks. I'm wondering if there is any way to improve parts where supports connect? My supports stick to the object and I have to sand them off. Some parts I'm making, it's hard to sand into small holes. Is there a trick to not have the supports stick to the model so it has a cleaner finish ...

Yes for some reason the option to sleep when possible was on
Turned off everything except screen going black and my print has been going since 1pm.
Whew!

Actually you made me realize, I just bought a new 3.2ghz Quad core computer actually it's my first print from it. I migrated all my data so it's like the previous computer where I left off, but I'm wondering if that's the issue. I'l try reinstalling the 0.91 like I did originally hopefully that will ...

I bought the first set of Rostocks didn't have the sd card option

I just made an order for the ezstruder and J-head mound last week.
The 0.91 update was supposed to stop this so I didn't.

OH OH! I had a print quit on me twice tonight in different spots!
:c

Now what. It was going perfectly now it's stopping with heat still on again.

YEEEE HAAAAWWW!!!! Thank you all so much!

I recalibrated and reversed the extruded motor setting and it's printing a print that always
stopped on me. Hopefully it works this now!

Motors sound much smoother now too, working great so far!
Happy Day!

Thank you sir! I use ABS haven't tried PLA yet but I might some day.

Here are some things I have made with the Rostock Max. Most items with holes needed sanding afterwards until I recently figured out better settings and upgraded hot end. Patiently waiting the 0.91 firmware build as I'm having my printer stop on complicated prints all the time now, would like to get ...

Thank you Eaglezsoar! I will wait then, I'm just a lowly benchwarmer.

Is there a build of 0.91 for the Rostock Max anywhere yet? ie. Where I just change my config.h settings and everything else is set for the Max?
I can't use the config tool, too much info to fill in that I don't know and the Master didn't work.