Welcome to the SeeMeCNC Community

Hi there, I uploaded my first part to and put it right into the contest :-) http://www.thingiverse.com/thing:81950 Its a printable bostonbox - This is a magic prop to conduct a nice coin trick. See https://vimeo.com/65008178 for a short demonstration of the magic :-) Here is a picture after applying ...

Just some more feedback. After playing a while i can tell you that most of the issue was because the filament size was configured to be 1.75 but in reality it was below 1.6 sometimes. Slipping was not an issue. But now i have some good results. Look at these pictures. IMG_5759.JPG . After printing ...

First of all, thank you for your input. I am in the process of getting better results. Most of the oscillation happend because the ABS plasting was somewhere between 1.55 and 1.65 instead of 1.75 therefore i had some starving in repeating patterns. But one las thing is still not clear to me, right ...

Hi there, my Rostock has been dialed in rather ok. I tried slic3r in the beginning and changed to Kiss later on. I think that Kiss produces better G-Code in most cases. So i modelled and printed a hanger for my bathroom door and it works well. But take a look at its structure. It seems like the ...

Dear forum, I did try my best to get this beast running and finally i got all my outper parts of the onyx level but the center is reasonable higher. I don't find the proper parameter in the repetier FW which should fix that. I read that DELTA_RADIUS should help but to my understanding there is no ...

So my repetier works great with the dev checkout at git and my LCD shows the different status pages, but - to be honest - i am rather disappointed ... how should these 3 pages allow me to print without a computer? Maybe i did something wrong but there is no menu in the lcd beside the status pages ...

Hi there,

i wanted to give KISSSlicer a try but i am a bit lost with some settings. Could please someone with a rostock max post his settings or screenshots of them. I print ABS right now but the temperature parameters are not the issue.

Thank you

max

jimrk wrote:Never mind, I got it working.

I am in the same position right now. Could you make some detail photo/description how and where you places the thermistor etc.

Thank you.

Max

For the European (220V) people out there, it would be great to add a FAT warning on page 20, that one must switch to the 230V operation mode using the tiny switch right at the power connector. I did recognise it when putting it into place that the default is set to 110V.