Welcome to the SeeMeCNC Community

Hi Michael, Thanks for the help, I've got it working much better now, It turns out that roughly doubling the probe speed helps a lot in my case, I used these parameters for M558 in the SD card config file. M558 P4 X0 Y0 Z0 F180 H3 My thinking is this, the FSR sensor measures Force but the JohnSL ...

Thanks for the reply, This is exactly what I thought, It appears I may have a problem where the FSR is not triggering quickly enough due to the slow approach during the G32 execution in some areas, i.e. the washer compresses a little before triggering FSR but not consistently across the bed. When ...

Hi mhackney, A quick question, do you find that you need to use the H parameter adjustments when using your FSR mounts on the RMax? or do you get good repeatability across all 13 points despite only having 3 FSRs, I'm noticing a skew in the printing plane but haven't had much luck removing it using ...

Many thanks mhackney,

just got the duet up and running with the fsr autocal and latest dc42 firmware and it's working great,

your guides have been extremely helpful in this process!

Rob

Ah thankyou so much!

Not quite sure how I missed that in the first place!

Thanks again,

Rob

Hi all, New member forum member here, although I've had the RMax for nearly a year now! Anyway as per title I'm trying to install a flex3drive (http://mutley3d.com/Flex3Drive/) on the Rmax but can't work out how to change the extruder step rate, the instructions suggest that the extruder step rate ...