Welcome to the SeeMeCNC Community

This is the video after the following GCode:

G28
G0 Z50 X0 Y90 F3500

[youtube]http://www.youtube.com/watch?v=gUqHQ1ZJ ... e=youtu.be[/youtube]

Micro steps : already set to 8
For the extruder, I've set the wrong value (292 instead of 584).

At this moment, due to the this, I'll verify the tension of the belt, and retry the test.

Thank all for the help. To respond to Cleveralias : as you see in the configuration.h, the nbr of teeth is set to 15. @daftscience the command : G0 Z100 F1200 will move the about 10cm from the heated bed. But if I move manually to an axis (Y + 75, ther nooze in always in the print area but in ...

The calibration is a very hard operation, can someone can provide a configuration (configuration.h, not for Marlin) for a Rostock Max (last year, with aluminum pulleys and rambo 1.0) as example. I cannot understand why the nose crash of this sort on the heated bed! If you have an example of config ...

Dear all, I read a lot of message from the forum, but now I cannot resolved the issues alone. I'll explain the problems encountered (sorry for my english, i'm french speaking), I have an "old version" of Rostock Max (Rambo 1.0, I think, the sticker on the board have a number starting with 10, it's ...

Geneb,

I've already read this thread and the PDF too .

But I want to connect the wires on the adapter provided with the LCD and not directly on LCD.
Or we can also add a column in the connexion table for the adapter ?

The simpliest operation is to create a new pcb design larger but with a direct connection to the EXT2 and SPI (and the connectors will be the same as main board : 2x4 connector and 2x10) , we have have the needed space for that!

I have some difficulties to adapt the Smart LCD adapter for the Rambo. I decide to begin with the pinout diagram. In this first rush the schematics will be made by hand (with mspaint, I know, but it's rapid). The ISP is correct, I think (on the right side, 2x4 pins) For the EXT2 (1x18 pins), the nbr ...

found It, just inversion between the 2 wires of the X endstop!

Noob mistake, Argh!

Done a test today, and it's strange:

- jumper set to USB : no green led
- jumper set to USB : green led on when endstop X is unplugged!

And the second solution permit to have the device listed in the device Manager (W8 64 bits).

Strange, stange!

Dear all, I try to connect the Rambo to my laptop but the system cannot find a new device (the led on the rambo is on/green, jumper set to external power source). I've plug the USB cable, reboot, scan for new devices, .... Do you have already see this type of behaviour (I'm running on windows 8 64 ...

It's not needed but if I place the led on the top acrylic top plate(on the side) , we can have an amazing effect.

Just like some indication panels illuminated with led. I have only solder a cable, in case of. I want to take 3 extra bright CMS leds for this!

OK I understand now. FOr my configuration, I've put the Rambo on the backdoor ( near Z axis, if I'm right).

And the front door for the LCD mount.

The front and the backdoor are entirely the same (same holes, same references), but no hole for the lcd, just for a fan.

THanks Mhackney, Speak English like a 'spanish cow', it's a french expresion meaning that the person speaks english approximatively. For my Rostock Max, I'm in the end of installation. Power supply wiring ok. I need to connect le LCD, the end stop leds and I' ll be ready for the first tests, I hope!

Dear all I have the Rostock max in acrylic version with the LCD panel.

But I cannot find the emplacement to mount it!

Do I need to mount it on the secon door ?

Difficult to find the exact place !

Thanks in advance

Gwenael

I'm a new member in the Rostock max clan.

I never see a machine with this dimension in Europe and that why I order a Rostock max in the USA.

I speak English (like a "Spanish cow") , you can also communicate in French too!

Have a nice day,

Gwenael