Welcome to the SeeMeCNC Community

So I did some extensive searching and found this. This sucks.... but my problem is fixed :) For the 1.2.X branch of Slic3r, they completely changed the way the bed is defined. It now defines a series of coordinates that draw line segments to build the bed periphery. The one it will generate for a ...

It really sounds like a firmware issue since you are able to actually print. It can be frustrating at times but I just take a step back and deal with any issues one day at a time!

I cannot figure it out but my 3d view of the print has it at center but in the layer view and when I print it puts in like the layer view!

See attached:

This was after using the MatterControl AutoCal (which shouldnt effect it?)

Wow the motor got so hot it melted the PLA inside of the struder.... Anyway to solve this in the future (I assume allow for a cooldown period)? Should I put a fan on the motor?

So I have been printing (finally!) and got through a 24 hour print with no problems what so ever. Now I started it up to print a 8 hour job and half way in (middle of the night) it started making a click sound at the ezstruder. Is my motor shot? I do not know what could be the cause. Going to pull ...

heathenx wrote:Here's one I just printed this morning. 12mm-1.0 tapered thread x 9.5mm barb. Threads look a little rough in the picture but screwed in perfectly to the metal female thread. ABS and sliced with S3D.

Do you mind sharing that barb file?! I need one just like it.

Ahhh its so annoying. I'll likely have to buy a new EZstruder.

So I am trying to take the EZStruder apart... (This was not built by me) and the hobbed gear is not aligned properly as I feared. I am having an extremely tough time getting the stepper knob off this thing. It is like stuck on. Any thoughts?

When it rains it pours :) So I went to put my filament (ABS or PLA) through the EZStruder and got it down through the tubing all the way down to the bowden on the extruder. When I click on extrude to push filament into the tip I cannot get the filament to move. Any thoughts on what I am doing wrong ...

Oh heck yes!

I was going to rip this thing apart and redo it all!!! The Y and Z were mixed up (labeled wrong!). I did not build this printer so that is why I keep having headaches. Tomorrow will be a good day

Thanks for the help thus far; I really do appreciate it.

No problem! When I look closely one of the screws is close to but not touching. Take a look

https://www.youtube.com/watch?v=g8m-VTmNnkk

Another thing I notice is when I click (Movement Controls) X+ it moves the axis down. When I click X- it moves the axis up...

Yup! from what I can tell.

Edit ------------------------

https://www.youtube.com/watch?v=habCugn ... e=youtu.be

exactly what is happening now to mine.

M119 when they hit says H on all. Low when I release.

Okay! Now we are going in the right direction.

Now it crashes into the end-stop switches! On the terminal they report H when pressed for each one. What would cause it to want to plow through the end stop?

https://www.dropbox.com/s/4c1filigaryhd ... h.txt?dl=0

It just crashes into the axis now.

See: https://www.youtube.com/watch?v=4JfTgNy2zNs

Yeah when I click i can see each motor move...

Okay, I switched the connectors to the right way and now instead of the crashing into the Y axis column it goes in the opposite direction! SO! I went back into the firmware and changed the INVERT_Z_DIR back to true from false. Now when I home it moves towards the X column. Any thoughts? Maybe just a ...

However I can move each axis manually as well...

[img]http://i1355.photobucket.com/albums/q703/scox37/20150917_1834021_zpsevhcym6w.jpg[/img]

[img]http://i1355.photobucket.com/albums/q703/scox37/20150917_1833501_zpso1kt4stv.jpg[/img]


Some images. Everything is plugged in. Would fixing my invert potentially solve it.

Okay, I'll have to tear into it tomorrow night! I appreciate all the comments and if anyone else can think of something else that would be cool.

Thanks all!

When I hit Home (G28) the Y goes up. Z and X do not move which has it crash into the Y column. When I had the INVERT_Y_DIR to false it would just crash down equally.

Yeah I M119 earlier in the steps and it was checking out alright!

Edit:

Just ran to the Terminal and did it again. Each stop displays the H (max) when I hold it in. Weird!

Hey guys,

I just got my Rostock V2 together and I am going to home the towers (had to invert my Z axis) and when I home the unit it crashes into the Y axis. Any thoughts on what is causing it? Did not mod anything in the config other then were I am at in the manual. Page 250...

Interested in a solution to this as well. I was thinking it could be something with the board?