Welcome to the SeeMeCNC Community

Thank you for your reply. I tried setting both the EXT0_EXTRUDER_COOLER_PIN and FAN_PIN to 2. But nothing is happening. I also tried changing the HEATER_1_PIN to 2 as well since that was the previous fan port. That did not work. Am I missing a declaration somewhere or am I not putting the right ...

Hello everyone, So I want to use the FAN2 port on the RAMBO board as my PEEK Hot end cooling fan. I've tried changing pin numbers (I've been using pin 6 as the FAN2 pin), changing the configuration.h and the pins.h file and have had no luck. Am I missing something is the code? Btw I am using ...

Hello everyone! So I recently (more like switched in June and been having problems since) switched my stock hot end to the E3D V6 1.75mm bowden hot end. Everything went together fine. I was able to print some small stuff (buttons for the Adafruit PiGrrl Zero) but after those prints I couldn't get ...

Cool thank you for the info, PolygonHell. I'm tempted to try this out on my machine but I think I'll wait a little and enjoy printing with it before I start messing with things.

Well, I tried re-uploading the firmware and using HEAT 0 for the hot end an it worked. My guess is that I did something to the firmware the printer didn't like. As to what that is, I have no clue. But it works. Yay. I do plan on posting a similar question to the google group for delta printers. I am ...

It's fixed! I re upploaded the firmware and tried HEAT 0 again just to see what would happen. IT WORKS!!!! lol
I will still post my question in the group though. I'm still curious as to how I would go about doing that. Could be a good way to save a board that may be considered broken but still usable.

See if this link helps you in anyway: https://www.google.com/search?q=site%3Aforum.seemecnc.com+heat0+heat1&ie=utf-8&oe=utf-8 Thank you, Eaglezsoar. The post did help a little. This confirmed my initial idea that I can change the pin layout and that my idea isn't crazy. It did leave me with more ...

So I reseated the thermistor and it seems to be working fine. Another suggestion I got from tech support was to check the LED lights. He said there should be two red LED's that light up located directly under the HEAT 0 and HEAT 1 inputs. The HEAT 0 LED does not light up and I detected no voltage ...

Hello Eaglezsoar and thank you for the warm welcome! I did post my problem in the troubleshooting section of the forums. Actually wondering if there's a guide on remapping the input for the Rambo board? Seems my HEAT 0 port doesn't work and I want to use the HEAT 1 input so I can at least print the ...

Sorry, I should have been a little more clear. At first it would not heat up after cooling down. Now it does not heat up at all. I also emailed tech support and they suggested checking the thermistor. This was my first time using rtv so my hope is that the initial installation of the thermistor ...

Hello everyone, I just finished my Rostock Max V2 stock build about a day or two ago. I was able to successfully calibrate it and got up to the point where I extruded some filament and was about to start my first print. After starting the first print I noticed the hot end wouldn't come up to ...

Hello everyone! My name is Mike from Long Island, New York. I'm new here and just built my first 3d printer, the Rostock Max V2. I'm a Computer Science major and IT guy as well as a hobbyist with some experience in the Arduino area. I gotta say, the Rostock Max V2 was a fun build and definitely the ...