Welcome to the SeeMeCNC Community

Yes. I used the 713Maker effector and Chimera mount. You should be able to config Repetier and RAMBo but my experience is with Duet and RepRapFirmware. I've also done the Kracken on a Rostock V1 - that was quite the experience. Is it worth the effort? Talking to a lot of different people, and it ...

Should have been a little more clear about my intent. I need to be able to also print support material with higher temp materials. To my understanding this rules out the Y adapter as the hot end would have to cool and heat between filaments. I use Simplify 3D, to my knowledge it handles dual ...

I seem to have a similar problem. I've been doing the same print over the past three weeks. It's not the same g code, but the same orientation on the bed plate. I auto probe before each print, and all the parts have a similar pattern on the first layer. Great infill on one side, poor on the other ...

Should have been a little more clear about my intent. I need to be able to also print support material with higher temp materials. To my understanding this rules out the Y adapter as the hot end would have to cool and heat between filaments. I use Simplify 3D, to my knowledge it handles dual ...

Looking to start printing dissolvable support material to open up the capability of my Rostock. Has anyone had any success running two nozzles on their Rostock? Any hot ends you guys recommend, or recommend staying away from? I currently have an HE280 on my V2/3, would like to keep the autoprobing ...

Hello, I just installed the HE280 on my Max V2, and am having some thermistor issues. When I first fire up the machine it reads ambient but after a few minutes the temperature will shoot up to 150C. I have checked the wiring, and it all looks in tact, I tried flipping the thermistor leads at the ...

Wrong Section.