Welcome to the SeeMeCNC Community

Not sure if its the same PSU on the V3, but worked a treat on my V2 power supply. Loudest part on mine is now is the heatsink fan.

Anyone had this working with the Duet/ Duet Wifi? Kind of want to try it instead of my FSR but unsure how much effort it would be to get the probe board working....

Cheers

I've flashed it with the 7" build :)... or at least i hope I did! Ill give it a go with a mobile charger and let you know, just noticed that the shimmering doesn't seem to effect the console > keyboard. Don't know if that helps? Edit: Found the problem, plugged it into the mains USB charger and it ...

Thanks Guys, I checked that the correct baud rates are syncs and they are (57600). DC, I did the test and saw there is 4.78V across those two pin. Seems a little low. The panalDue board is from think3dprint3d using the cable they provided so I guessed that would be fit for purpose? Also worth noting ...

I've just upgraded my Panel Due to the 7". All lines on the vertical axis appear to be noisy and wavy, like there made of white noise. Is this normal or have I got a broken screen?

teoman wrote:Wonder if a noctua one would fit.

That's how I know a 60x60x25mm wont fit I tested it with the one I bought to replace the exhaust fan. They don't do a 60x60x15 version unfortunately.

Got around to doing this this weekend. For people looking to do this with the newer powersupply it's a Doceng 60mm x 60mm x 15mm fan in mine. I stumbled across and ordered one that should be 16db on full chat, should fix my noise issues nicely if it works.... Just to note, a 60x60x25mm fan does not ...

I've got one of the new Power Supply (the new industrial one) but the fan noise is very loud when on. I was wondering if anyone has ever replaced the fan in this and if so does any one know what size of fan I would need to get to replace it?

Cheers

I followed the "Version 1.25, February 17th, 2016" if that is the latest one? Leveled the bed with both the first method stated and the alternative method stated near the end (the one using feeler gauges). It was the first thing I did was go back and follow it precisely when getting problems to make ...

Just sorting out the calibrations on my Rostock MAX v2 . Towers seem to level nicely when calibrating but when I am printing the level aid as a test the print nozzle end up a good couple of mm away from the bed mid way between X & Y Tower . Just wondering if there are any potential fixes. I have ...