Welcome to the SeeMeCNC Community

Thanks for the update! Unfortunately i am still having the probe creeping issue even with smoothing and priming 3 times.

PyjamaSam,

Thank you for all your research and troubleshooting! I hope you and 626Pilot can work together to resolve these bugs. I am no expert at programming, but plan to look at the code as well, to at least follow along. Otherwise... I will patiently await for the next GitHub commit!!

Thanks!

And another update:

Even with running M502 before doing G29 E, I cannot get the newest March 2016 version to pass G29 E. I still experience a decaying creeping effect for my Z probe.

Last spam... here I ran the G29 E one more time on the January 29th commit, BUT this time I ran M502 before running G29E... et VOILA! 18:12:45.553 : config override file deleted /sd/config-override, reboot needed 18:12:56.914 : [PR] Repeatability test: 10 samples (S) 18:12:56.914 : [PR] Acceleration ...

Sorry for the spam, but here is my G29 E run with the January 29th commit of your fork: 18:08:45.175 : [PR] Repeatability test: 10 samples (S) 18:08:45.175 : [PR] Acceleration (A): 90.0 18:08:45.175 : [PR] Debounce count (B): 0 18:08:45.175 : [PR] Smooth decel (D0|D1): False 18:08:45.175 : [PR ...

Hi 626Pilot! So my under-extruding was a stupid mistake... I originally edited the steps/mm in the commented portion of the config...DOH! Was easily rectified! Lets hope it prints properly now! I also raised the current from 1.0A to 1.2A. No noticeable difference. When I hold my finger on the ...

Pulled from another thread for more exposure. I nearly have 626Pilot's fork of Smoothieware working for my ex-Micromake Kossel Mini. Here are my remaining issues: 1. About 10 seconds into a print, my LCD screen (viki2 compatible - shipped with AZSMZ Mini) goes completely blank. I need to do a ...

626pilot, thanks for chiming in! I know some of these questions are not specific to your firmware. Appreciate your help! 1. In advance of starting up my Kossel mini with AZSMZ Mini for the first time, I made sure to comment out all the lines I did not need. Would you prefer that I not comment them ...

My most recent result: 21:48:26.695 : [PR] Repeatability test: 10 samples (S) 21:48:26.695 : [PR] Acceleration (A): 90.0 21:48:26.695 : [PR] Debounce count (B): 0 21:48:26.695 : [PR] Smooth decel (D0|D1): False 21:48:26.695 : [PR] Eccentricity test (E): On 21:48:26.695 : [PR] Probe smoothing (P): 1 ...

Caal99, Attached is the sept19 firmware and my config file "make sure you change the setting based on your configuration" Thank you, I tweak a few more settings in my config and got your original posted firmware to work. Machine is calibrated! 0.25 energy, which is good enough for me given this ...

Here is my G29 E on the NEWEST firmware, since I couldn't get the sept 2015 firmware to work: 19:05:34.207 : [PR] Repeatability test: 10 samples (S) 19:05:34.207 : [PR] Acceleration (A): 100.0 19:05:34.207 : [PR] Debounce count (B): 20 19:05:34.207 : [PR] Smooth decel (D0|D1): False 19:05:34.207 ...

Not sure if you can still find it online but here it is. Attached is the 626Pilot's Delta Calibration Firmware dated Sept19.2015 I had to zip the file to be able to attached it. let me know if it doesn't work. Look at your display when you flash it for reassurance, it should show the date Sept 19 ...

Hello Everyone, I'm late to this game, but I've read through everything on this page - and I'm at a complete loss - no idea where to start asking questions. 626Pilot, I've read through everything you posted, but I just can't get my bed level. I have an Openbeam Kossel Pro, using the z-Probe that ...