Welcome to the SeeMeCNC Community

Hey I'm interested in some things, I'll send you a pm

hmmm if you have the v6 it's like the same, aside from the no auto calibration in z height. at least... that what i think is from the new v3 package. compared to my v2, thats really the only feature my v2 doesn't have. and due to motors and everything else being on top, wiring is easier, so i think ...

I am curious that you say the older board behaves differently. In what way? i think it's minor but, it's not anywhere near as smooth as the v2 rambo, in terms of just rail movement, i've uploaded the exact same settings from my rambo to another, and it seem to work fine without much calibration ...

as the title says, I've blown a rambo board. the heat bed terminal melted, so i had fun sawing it off, and then saw the capacitor was blown, so the question is can i get it fixed? or is it too far gone... I've placed my older v1's rambo in my v2, it's a bit older variation it seems.... but it also ...

Very much enjoyed looking at your setup, can you provide link to that fire extinguisher on the inside on your enclosure? Thanks

Hey guys, I'm still in the process of rebuilding one of my rostock, so I'm trying to figure out what is the longest length or LCD cable I can use for the 2004 LCD from the kit. So I have my printers in a closet, and I've built basically two cubbies in the closet to house the printer's, and soon it ...

talked to martin, he just said to drill it out with a 2mm drill bit, and i did, except with a smaller 1.5mm bit and ate away at the plastic until i could grab it out with tweezers.
gonna try a print again soon, see how it works, i've changed the filament... sigh, don't trust that roll anymore.

thanks

So I've been trying to print, and after a while i've noticed that the first layer are coming out really bad, and now the jams happen more frequently, after a misprint two nights ago, i called it a night and turned off the printer after cooling down,Turned it on today to find a jam, i immediately ...

Tincho85 wrote:Nice effector Brian!
One question, can this new probe board be used with the E3D V6 or others hotends?

nice, i'm also interested in finding out if that probeboard is usable with other hot ends, e3d v6 and others. thanks =)

okay, I've loaded the slicer settings you suggested, we'll see how it goes, the retract was really loud, so i think 110retract was way too much. i did play around with octoprint, it was pretty cool. I couldn't get octoprint to actually print, but the camera feature was sweet. I couldn't get the ...

Hey guys! after some busy weekends, I've assembled the v2 and it was up and running for a bit, now I'm running into problems of jams, just like my v1. they both continuously jam, I've changed the bowden a few times now, and it still jams. I however think it has something to do with my retraction on ...

So it still keeps jamming, mostly on big prints, either one or two of these happen. 1 the Bowden tube connector near the cold end pops out, and filament no longer goes through. Or 2 the plastic jams from hot end side? Or a combination of both This happens when I'm trying to print the rostock ez ...

alright, so this is what i found out. it's a mixture of what you're saying and my own personal mess up. so yes, there was a type of pla i was using that just did not want to print very well. but the stock white works fine, for now. It's printing pla @210 with fan on, and bed @60. I found the culprit ...

Hey guys, While I was waiting for the 713 mount to arrive, I ended up just buying another stock kit and setting it up because... its taken like a month or two now just to wait for parts, was getting impatient. However in my other machine with stock ez-struder and stock hotend, my filament keeps ...

oh i've seen this come up but, does it matter between getting 12v and 5v fans? i would imagine it would, since a psu is 12v? i'm not familiar with power ratings and such. saw some talk about getting noctua's 40mm's but theres two versions, but i'm not sure if i want to pay the premium for those tiny ...

quick question, i'm getting the last few pieces that i seemed to have forgotten, but What would you suggest as good layer cooling fans. is 40mm the standard? mostly going to print pla, so i would like to have the trio cooling fan setup. currently waiting on the 713 mount for my v6 and the pei layer ...

hey guys, quick update! the parts just came in, hopefully this is everything. [img]http://i.imgur.com/56rg7U7.jpg[/img] bondtech qr + rostock mount v6 and volcano and bowden adapter? and all the nozzle and other stuff included in standard kit. basically I'm at the point where everything is almost ...

Although I agree with (and certainly subscribe to) 'Go Big or go Home' you might also consider putting this one back together as stock. That way you will have plenty of support here on the forums, experience an easier learning curve, and end up with a 'nice enough unit' for much less than retail ...

yeah, it's pretty bad, so far, i've ordered the newer arms/cheapskate carriage set, new bearings for the other 9 that need to be replaced, and the cold end and hot end i'm currently debating. I think i'm gonna go with the v6 because it's pretty widely used, but probably will get the bondtech cold ...

just curious what a good 24v psu would run me as well?

hey guys, here's a quick update with pictures. Can you post close-up pics of the arms and the bearings? I'm curious to see what that neandertal did to the poor machine. :) g. First thing's first, @Geneb, here's a close up of the arm's shotty surgery. [img]http://i.imgur.com/uvADtJA.jpg[/img] [img ...

so i opened the package today, i think overall it wasn't so bad. http://imgur.com/a/BMCWi overall it was fairly nicely packed, theres peanuts everywhere, and out of everything right now, i can tell, the arms are broken. and there is no print head/extruder and also the bearings are pretty worndown ...

Hello guys, thank you for the input, I'll be picking it up tonight from my office to take home to tear down and reassemble. I was very worried about the board not being there, abd if it was there, if it's still on great working condition. I had already had thoughts of getting the duet board just ...

Hello SeemeCNC forums members and moderators, I recently just ventured into buying a Rostock Max v2, however, the one i purchased (from ebay) comes incomplete. currently it is on it's way to my residence, waiting on the delivery of the product. However from the ebay pictures of the auction, I can ...