Welcome to the SeeMeCNC Community

Okay, so I figured out that the x y max length values don't apply to delta style printers, and by changing tower rotation I've managed to get it to a point where it does not appear to be making a convex or concave motion towards the y and z tower respectively anymore. I've also managed to level out ...

Okay so I tried increasing the Alpha B to 91, and it actually fixed a lot of the problems. At this point, it still dips a little going from center to the Z tower, but everything else is aligned near the towers. However, at X-77.93 Y45, the nozzle dips way deep into the glass plate, as well as to a ...

Yes, all the extrusions are touching the set screws, the whole thing is locked down pretty tight.

Should I keep the X endstop rotated? I had previously given up and reset everything back to stock values.

Hi, I've had my Rostock Max V2 for a couple of months now, and I've made some relatively small prints without much problem up until now. I've reached the point where I wanted to start printing some larger parts that I had designed, and I've been noticing some shearing at and adhesion problems near ...