Welcome to the SeeMeCNC Community

The printer doesn't cause issues when EEPROM_MODE = 0. But changing the value to 2 worked. Now I've changed it back to 1 and everything seems good. What I found odd is that the comments also state that: " If you later want to overwrite your current eeprom settings with configuration defaults, just ...

Hi, as stated in the description, I get a delta overflow when the EEPROM_MODE is set to 1. This happens whenever I try and Home the printer from Repetier. Specifically, it happens whenever moving upwards. I thought maybe there is something funky in the EEPROM that is screwing with my settings, so I ...

yeah, i got the "all metal, sharp-tooth drive gears" which also makes replacing the belts more expensive because I'd probably end up getting new pulleys also

Any new revelations on this? I'm looking into this as an alternative to replace my broken timing belts.

Spools and line here: http://www.tridprinting.com/BOM/Kossel-Legacy/ is $30+ shipping

vs

$20 per tower for timing belts

Thats odd... I used Autodesk Inventor and made sure to select mm parts. Well at least I know the easiest fix is to scale x10 it in repetier.
Thanks guys

Hey, I attempted creating a support bracket for my bookshelf. The part was designed to be 55x30x12 mm. However, when I load it into Repetier, the part seems way too small, especially compared to other existing parts I have made. Anybody know what I might be doing wrong?

Anybody else want to go in on a group buy? Or did I miss the party

Yep, the EEPROM is what did it.
Thanks for the quick response!

Yeah, so I tried both combinations of 20 tooth and 15 tooth, but if i run the G0 Z0 F3500 command, it stops about 95mm from the build plate instead of 10mm.

edit: Forgot to note that my Rambo is version 1.1b so I left it at 1/16 stepping

That's what I thought, but I am using repetier firmware. After reading through this forum, I got the impression that all I need to do is set the correct belt pitch and number of teeth on pulley. Since I am using stock parts I popped in 15 teeth and 2mm pitch into the configuration.h file and ...

Hi, I've been going through calibrating my rostock max using the 4 scripts and a piece of paper. However, when bringing the end effector down at the center to adjust the x/y/z max length values, I find that the only value that gets it to just grip the paper if its all the way up to 491. Actual ...

tis coming along. Just school work impeding progress. Also gotta get me some screws to mount rambo. Searched all over the kit but could not find ones that were long enough to go through everything and had the correct threads to get into the blind t-nuts.

So I finished screwing together the base, only to find that I forgot to pop out one of the cover brackets...

Guess I'll have to do it again tomorrow after my midterm...

Wow, that was a quick response.
Thanks for the help!

Hey, I started building using the geneb guide. However the electronics mount on his guide and other build threads show the electronics mount having holes in it. Mine doesn't (see attached)...

Any help?

Hey, I finally took the plunge.
It was a nervy moment as I clicked the button and gave away a grand.
I look forward to bugging you all with my rostock problems

Hi, I'm wondering what would happen if I ordered a kit and received skewed parts as mentioned. Could I have them sent back for replacement? What would that cost me to do so?