Welcome to the SeeMeCNC Community

Well, I figured it out on my own.. sort of. I did a full erase of the EEPROM (using arduino IDE and the example erase EEPROM code) I power cycled after uploading that. Re-uploaded the .91S from GIT Now things appear to be all moving and heating and working in the right directions. now for the ...

Ack... I had not used printer in several months due to problem with heated bed wiring.. I fixed that, and everything was working great.. Then I decided to update the firmware to 91s... Now when I home printer it appears the endstops are ignored... printer homes all three towers but ignores the ...

I got one of these. I am installing it now and will post an update soon. I was able to get it mounted up really nice, it's well made.

so somewhere along the line the fans got set back to 100%… seems to still be working out ok though

http://imgur.com/a/2KoYV

I hadn't seen the recommendation on .5mm nozzle. I'm doing .325 for the layers though…
[img]http://i.imgur.com/XEaxcHC.jpg[/img]

I've got just 3 25mm fans in the standard CNC head all facing in at the peek… but they do seem to provide a good little wind enough to keep most of my PLA prints cool at 100% .. so for this I set them to 30%… just because… so far seems ok so I'm not messing with anything.

I am just doing my first print with the t-glase as well. I started with hand feeding … I started getting melt around 203, but flow around 215…
.35mm head, 30mm/s and it seems to be working nicely at the moment.

Agreed -- trying to do the first calibrations and finding the instructions to be lacking a bit. I am trying to write down everything I do.. more than happy to contribute to a guide if I can.

My first venture into 3d printing is being assembled by me at the moment, a Rostock Max... I am an integrations and solutions architect in the Information Technology field and have a real interest in both the delta robots and 3d printing separately and when I came across the delta 3d print models I ...