Welcome to the SeeMeCNC Community

just use solder iron and retin all wires before you plug it in connector , small wires are to small for this type off connector

true thx
goes back to 6factor as the print was to small 0.5mm

little bit outdated thread :) i put some my findings stock rostock max v3 + duet wifi +teensy to run probe on H280 G32 Calibrated 6 factors using 13 points, deviation before 0.089 after 0.089 M665 Diagonal 291.600 , delta radius 144.247, homed height 405.333, bed radius 140.0, X -0.001°, Y -0.123° ...

After few days fight whit duet wifi and teensy i found solution :) weak point in this build is FAN always on :) , on calibration time i put joint of 3m tape to stop it (fan movements) and callibrated successfully every time thx trash80 for this solution and dc42 for duet , soft etc... , mhackney for ...

Working all well >? would switch to duet wifi and keep h280
ordered duet wifi and teensy 3.2 is anything else that i need?

have tryed 3 clamps only and 3 oposite no change

delta calibrating to 2 4 6 8 12 then 4 in the midle 8 in the midle and 12 in the midle and center 13
around this points is nice surface but on points 3,7,11 i have hole in bed:)

can someone explain me why i got something like this doing deltacallibration i get Calibration Result: Calibrated 6 factors using 10 points, deviation before 0.04 after, 0.01 where should be perfectly but is not on points 3 ,7 ,11 filament don't stick to bed (on this points delta don't run sense ...

yes sure please i can do everything to get it sorted i use PETG 233 extruder and 65 bed temp now moved a bed clockwise 1 point and make again deltacalibration manualy and got Success! Calibrated 7 factors using 10 points, deviation before 0.06 after 0.02 but still ring callibration fail :( photo ...

ohh still have bed tilt (deltacallibration plugin for octoprint) :( can prints small parts but failure on large part:( how i can solve this problem? in MC after 13points software callibration i can print perfect 280mm callibration ring but not with Deltacallibration plugin :( here my results after ...

awesome:) geneb please change thread title to Octoprint Delta calibration plugin

making some metaldetecting shaft :) and first part today :) PET-G used :) having trouble with fresh mounted HI-TEMP JET was cloging etc , and removed it [img]http://www.bbmail.co/deus/custom/1r.jpg[/img] [img]http://www.bbmail.co/deus/custom/2r.jpg[/img] [img]http://www.bbmail.co/deus/custom/3r.jpg ...

mhackney wrote:Not a silver bullet but the less you make the auto calibration compensate for, the better!

you doing autocalibration in octoprint or using mattercontrol ?

i have to issue with bed v3 +rpi3

guanu wrote:it works well enough for me.. so far I have 5 days printing time on my v3 for testing..

20160827_205049.jpg

results looks good..

20160907_191257.jpg

hi would like to print one Hovalin what setting you used i have to max V3

found today first failure after build:)
filament stuck in HE280

step 28 final assembly
The Bowden tube will fit nearly the entire length of the hot end, so make sure it's fully seated.

when i did it hangs at 20mm and should go deeper 43mm in HE280.

excellent enclosure:) Twac1 its possible to get the .stl filer for brackets mount? Plexi

.... You do have to setup a printer profile too. Click Settings then Printer Profiles. Click Add Profile... and enter the info for your printer: Form Factor - Circular Origin - Center Volume X - 275 mm Y - 275 mm Z - 400 mm Heated bed checked Nozzle diameter 0.5mm thx for this but howto setup Axis ...

mhackney wrote:For those who bought the RaspberryPi kit from SeeMeCNC, did it come with the mounting standoffs - the ones like the RAMBo standoffs used to attach the board to the top plate?

yes i got mounting standoffs with:)

Finished today build RostockMax v3 :) (about 2 days job with breaks) thats my first printer 3D :) very exciting overall quality and build. --edit-- few photos:) [img]http://www.bbmail.co/rostock/1.jpg[/img][img]http://www.bbmail.co/rostock/2.jpg[/img] [img]http://www.bbmail.co/rostock/3.jpg[/img ...