Welcome to the SeeMeCNC Community

Great, just confirming it has been done. Did you print a custom adapter to hold the Titan Aero and accel board? If so, I would be curious to see pictures and/or CAD files to use or get inspiration for my own build.

Hi Everyone, I have been printing with the stock Rostock MAX V3 since December and am ready to change it up a bit. I have been able to reduce stringing and oozing after quite a bit of calibration, but I just bought a Titan Aero to ditch the Bowden tube. I have a few posts and searched online about ...

I got it working! While I had continuity across one of the I2C wires, I was sticking my probe too far in the connector that connects to the RAMBo. After pushing the cable farther in for better contact, it worked. Guess the ferrite chokes can't hurt, so leaving them on.

Xenocrates, I was calibrating cold. I have checked all the I2C wires and I have the correct connections / continuity. I even installed two ferrite chokes per the video below, but the problem persists. Any other suggestions?

https://www.youtube.com/watch?v=DxGT18rDKUM&t=309s

Mechanical and Aerospace Engineer in LA who finally decided to buy a 3D printer! I was big into high powered rocketry in college, but hope to use this printer to make components for my next build now that I no longer have regular access to a machine shop. Purchased the Rostock Max V3 and just need ...

Got the extruder motor working! So everything appears functional except for the calibration issue shown in the video.

Hi Everyone, I just finished building my Rostock V3 Max and am having issues running the calibration software. I can use the settings and controls in Matter Control to actuate each stepper motor (except for the extruder motor, no idea what is going on there), fans, heat bed, and hot end (both up to ...