Welcome to the SeeMeCNC Community

looks like everything is well connected, tested with the multimeter with the machine off, of course, there is connection between the pins

so maybe the accelerometer is damaged?

same wiring, only difference was that I used other pair of cables

I compiled against 1.6.0 and still the same accelerometer comm error

I compiled against 1.6.0 and still the same accelerometer comm error

Thanx for the reply, okay, rewired everything and it doesnt reboot anymore, starts normally, now, and in the terminal I see this: start Info:Autoleveling enabled Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 Free RAM:770 Autoretract:0 X:0.00 ...

A couple of days ago I bought a HOTEND ACCELEROMETER PROBE PCB BOARD REV 6A for my rostock v2, I made the replacement, with the firmware version 0.92.2 is showing some blue leds and when I turn the temperature on, it turns red, which I believe is okay, however if I go to the firmware and modify the ...