Octopi Changing to my second extruder on a single color print

Talk about the web based OctoPrint controllers
Post Reply
cruzinbill
Plasticator
Posts: 17
Joined: Mon Feb 06, 2017 8:04 pm

Octopi Changing to my second extruder on a single color print

Post by cruzinbill »

Have had this happen twice now and not sure what is causing it. I loaded a print I've done before and it is definitely cut as a single color. After about 2 hours in it just randomly changed to my second extruder and began using it instead.

Anyone know why this is and how to fix it?
User avatar
pouncingiguana
Printmaster!
Posts: 148
Joined: Tue Nov 15, 2016 8:48 am

Re: Octopi Changing to my second extruder on a single color print

Post by pouncingiguana »

Known bug when using Octoprint to control a Rostock over usb with dual extrusion enabled. We're crazy with out move right now, but the short fix is to print from the SD card and shut down the PI. It'll print right every time.
cruzinbill
Plasticator
Posts: 17
Joined: Mon Feb 06, 2017 8:04 pm

Re: Octopi Changing to my second extruder on a single color print

Post by cruzinbill »

Ah ok thanks, I'll simply disable dual extrusion then enable it when doing that type of print. That makes sense then since it didn't happen until I told octopi there was 2 extruders.
johnknoy
Noob
Posts: 2
Joined: Tue Jan 10, 2017 11:42 am

Re: Octopi Changing to my second extruder on a single color print

Post by johnknoy »

Does anyone know if there's a potential fix for this issue? I love Octopi and my dual extrusion adapter, and would love for them to play nice together!
User avatar
pouncingiguana
Printmaster!
Posts: 148
Joined: Tue Nov 15, 2016 8:48 am

Re: Octopi Changing to my second extruder on a single color print

Post by pouncingiguana »

Afraid not - there's just not enough memory on an 8 bit board to do all the things Repetier is doing.
Mac The Knife
ULTIMATE 3D JEDI
Posts: 1407
Joined: Sun May 11, 2014 6:18 pm

Re: Octopi Changing to my second extruder on a single color print

Post by Mac The Knife »

,,,,,,,But on a 32 bit board,,,,,,,,,,
R-Max V2
Eris
Folger Tech FT-5 R2
User avatar
pouncingiguana
Printmaster!
Posts: 148
Joined: Tue Nov 15, 2016 8:48 am

Re: Octopi Changing to my second extruder on a single color print

Post by pouncingiguana »

On a 32 bit board you won't be running Repetier. Running DC42's Reprap on a Duet has no problem doing dual extrusion.
Post Reply

Return to “OctoPrint”