The girl of my dreams lately!

[bbrvvvvv]

I am going to share my latest print with and one I am most proud of. Please don’t take offense it is for mature members only!! Must be 18 year or older….. I wish I could say it was my first try but it took 3. Fist two I tried to slice using vase (shell only) with no luck. All pics are untouched still on the printer just after completion
She is truly beautiful!
12hours print time
1.75 ABS
.35 tip
KISSlicer with 33% straight infill
.200 Layer height
At a speed of 30mm
I had no idea this printing stuff would turn me on the way it has…. Haha
Happy printing!
Werner

[Polygonhell]

How/When did you put in the chin support?

[Flateric]

Is this an STL file available anywhere?

So shiny! Looks great.

But one day you are going to have to start showing some of your failures so that we know your not some kinda demi-print god or something like that! LOL

[bbrvvvvv]

Hi Buddy, The chin support was easy. KIISlider showed me at what layer/mm hight I would see the first island. I just slipped my fixture onto my column, mounted the putty knife and started watching my LCD DRO for height. I slid the fixture up to keep it flush with the print level. There were about 7 or so layers that were islanded before it connected back up with the model. I had gone out to dinner taking longer than I thought to get back only minutes before my printer was at the chin layer. I was so happy I caught it in time!! Also it was fun to watch the printing of the head with so many cantilevers I was in awe.
Happy printing!
Werner

[bbrvvvvv]

Thanks Flateric, Here are my failures, although I now have a very nice pencil holder. That fail was actually because for absolutely no reason my Microsoft Surface decided to turn off!! After 3-4 hours it just turned off. Keep in mind I did every to make sure it would never do that! The Surface has done that twice. Needless to say I cannot use it for printing anymore. The best Microsoft computer tech I know looked at it and said ----Huuuu---- I don't know why it did that. Anyway now I am using a small Gateway net-book and its working great. The other fail was when I just could not get any more horizontal out of the printer doing a shell. I even had 3 loops. I quickly realized I was asking too much! It did help me to notice how smooth I could get by playing with the feed speed!! Very cool.
Happy printing!
Werner

[Eaglezsoar]

Is this model on Thingiverse?

[oeginc]

Nice model! I'm interested as well... Couldn't find anything like this on Thingiverse (at least with a head)..

[Flateric]

A very nice pencil holder indeed! You could have claimed you stopped it there for just that reason! LOL

Yes, that's it, I meant to do that!

[Eaglezsoar]

Werner, are you willing to share the STL for the Lady? I can find the "Pink Panther" but none seems to have the head!
That is a great model especially coming from your printer.

[Flateric]

Ah HA!

One of her boobs is crooked!

Flaw!

Kidding....LOL.

[Flateric]

I got a print running right now of your dreams girls sister! Can't wait to show you, Eaglezsoar is aware of what I'm talking about, hehehe, LOL.

[Flateric]

Ok here she is!

She actually quit on me at about the same point as yours so I also have a pencil holder.

Just yours is far far more attractive and doesn't need heavy lift equipment to get around.

The funny thing is, I have no clue how or why this turned out like it did and I doubt very much I could have managed to get this effect if I had tried.

Odd that the layer size and finish is so good on such a badly proportioned model. Layer size was .15 with a seeme stock hotend and a .35mm nozzle.

She even got cottage cheese thighs, LOL.

Wow prepare yourself!

But since I am such a nice guy Berry, I'll trade ya straight across your pencil holder girl for mine, what do you think!?

Limited time offer now, don't think too long.......(pssst, I can't keep her here any longer, she eats too much!)

Seriously why did this happen though? (and also why me? LOL)

[Eaglezsoar]

Darn! I wanted to see more! I hope Berry takes you up on your offer and makes the trade, make sure you get his STL
so you can give me a copy.

[Flateric]

The only way we can get him to make this trade is if he is drunk!

Beer goggles you know!

[Eaglezsoar]

Let's all chip into a Get Berry Drunk fund! After he's drunk, he'll make the trade and cough up the files.
We could also picket outside his house with huge signs saying "WE WANT THE FILE!"

[elqisqeyano]

Let's all chip into a Get Berry Drunk fund! After he's drunk, he'll make the trade and cough up the files.
We could also picket outside his house with huge signs saying "WE WANT THE FILE!"

When and where?

[Eaglezsoar]

elqisqeyano, you just ruined all of our plans. We didn't think of that.
I know, we can be at one of the shows where Berry is showing off his Berrybot
then we can take him out and get him drunk. When is the next show that Berry
will be at and where (see we don't make the same mistake twice).

[Flateric]

If he doesn't drink well then we have no choice but to tranq him with a rifles from afar. Safer for the whole who did this situation to follow to you know!

I can just picture it.

"So this is my Berrybot, it has magnetic ujoi----fip!--- um, uh, I'll just lay down for a sec here if you guys don't mind?

Swarm of forum users crowd in, we got this, we professionals (professional whats? Well we won't fill that part in).

Done deal.

Perhaps our whole planning it out in his thread here is not the brightest move however. He'll wear big collars on his shirts that contain stainless shielding!

LOL

HA!

[Eaglezsoar]

He'll probably wear some kind of magnetic shielding.

[elqisqeyano]

Looks to me like he can build himself complete Iron Man Suit!.LOL... I tell you guys what, you do all the hard work and I get away with the macine. That a good deal? Then I will have to look out for my back make sure you guiys are not chasing me. LOL

[Flateric]

Ha! I hope your a BIG strong man! That machine looks like it is not built for travel. Besides no tranq on earth would be able to stop Berry from simply grabbing you if you made a run for his true love, LOL.

I know it would be like that for me anyways.

[bbrvvvvv]

Thanks for the heads up Printmaster! I had no idea how much fun you guys have been having! I have been laughing my ass off for the last 30 minutes. Please quit Flatericing me! There is no question how beautiful she is especially if we were to stand her next to that red Devil…… Man I don’t know what happen there I can only guess too many Strawberry Fraises made her into that….. I just quit drinking right now. Hahahahahahahahahahahah………………………

[Eaglezsoar]

Berry!!! You left us without the file.
What can we do to get it? I am getting tears all over my Rostock Max and I am sure the steppers are all going to rust
internally and never turn again. Your not allowing us to have the file to our darling model is causing more harm than you
can ever know. Once we saw her, we have to have her. We are kindred spirits and need each other.. Please what can we
possibly do to get the file to print our true love? You made us love her and now you discard our love like a used newspaper.
How can you live with yourself knowing how many broken hearts you are leaving us with. Give us the STL or give us DEATH!

[elqisqeyano]

I'm not sure what you guys are trying to get, but I'm trying to get the files to that magnetic system for the Rostock Max. FILES PLEASE!!!

[Eaglezsoar]

We are trying to get the file to the girl of my dreams! She makes the BerryBot look like a clothes pin. Would you
like to join our campaign to get the girl of my dreams file? We can always make a BerryBot but the girl of our dreams, NEVER!