EZSTRUDER mounting plate?

[truenorthtrader]

Hello I just bought an EZSTRUDER but there was no mounting plate with it so I can't use it.

Is there an stl file I can download to print one? I have the original Side spool holder I'd like to be able to just connect the EZstruder to that.

many thanks!

[neurascenic]

Should be in here somewhere.

https://github.com/seemecnc/RostockMAX/ ... FILES/STLs

[neurascenic]

Here are the melamine parts

https://github.com/seemecnc/RostockMAX/ ... FILES/DXFs

[neurascenic]

I got a 2 sets of the melamine, as there was something goofed in the first. I can check tonight, I might have the extra set of the melamine. I don't think I used those.

[Eaglezsoar]

There are a few mounts on Thingiverse you can check to see if they would work.
http://www.thingiverse.com/search/page: ... truder&sa=

[truenorthtrader]

Thanks all but it's no where there that I can find. I can't open dxf files also.
Thingiverse doesn't have anything that looks like the parts in the manual
Parts 70778 and 70779

I emailed Seemecnc maybe they have it
thank you!

[neurascenic]

Are you looking to print one? or laser cut. the .dxf files are intended to laser cut.

[truenorthtrader]

Yes print the pieces as I'm still using the Steves Extruder haven't installed the EZStruder yet

[Nylocke]

The printed mounts aren't meant to mimic the original mount plate, they are meant to provide a different mount solution. You can use something else, printing the laser cut mount out wouldn't be ideal.

[mhackney]

I'd recommend printing this one and mounting the ezstruder under the top plate. I'm putting 3 up there with this mount for the Kraken 4 nozzle hot end.

It's a nice clean, out of the way mount. The spool goes on top. Nice and compact.

[neurascenic]

mhackney,

are you going to use all for nozzles? how would you put together the 4th?

[mhackney]

Yes, I'm documenting it in the build forum under Kraken.

I am using the original sidearm mount for 1 extruder and then 3 mounted to the top plate with the mount I linked to. Should be quite the feat!

[Nylocke]

What is your plan for controlling all 4 hotends and extruders?

[mhackney]

It's all in the thread. I'm using the new Azteeg X3 Pro board that support 5 extruders and hot ends. Quite the beast!

[JheregJAB]

Due to what was probably improper use of our machine, I recently had to make a new bracket like what you are looking for. In my case, I needed 70779.

I managed to find STL files for 70779 and 70778 for the EZ struder here:
https://github.com/seemecnc/EZStruder/t ... 20adapters

Just thought I'd post these, in case someone finds this thread while looking for these files in the future like I did.