100K Thermistors Reading 113.6

Having a problem? Post it here and someone will be along shortly to help
Post Reply
User avatar
JohnStack
Printmaster!
Posts: 839
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:
Contact JohnStack

100K Thermistors Reading 113.6

Post by JohnStack »

Huh?

Does it matter since everything is done with PID?

Anyway, I thought I would ask.
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a
Top
int2str
Printmaster!
Posts: 193
Joined: Tue Nov 19, 2013 8:38 pm

Re: 100K Thermistors Reading 113.6

Post by int2str »

You need to use more units.... 113.6 what? Chicken nuggets? Ohm? Degrees C? etc....
Top
Eric
Printmaster!
Posts: 717
Joined: Sat Aug 18, 2012 4:09 am
Location: Chula Vista, CA

Re: 100K Thermistors Reading 113.6

Post by Eric »

It's only supposed to be 100K at a specific calibration temperature, usually 25C. 113K would simply mean your ambient was a few degrees cooler than that.
Top
User avatar
JohnStack
Printmaster!
Posts: 839
Joined: Thu Jan 03, 2013 7:07 pm
Location: Carlsbad, CA
Contact:
Contact JohnStack

Re: 100K Thermistors Reading 113.6

Post by JohnStack »

Eric wrote:It's only supposed to be 100K at a specific calibration temperature, usually 25C. 113K would simply mean your ambient was a few degrees cooler than that.
113K Ω of course.

Makes sense. It was about 68 degrees.
Technologist, Maker, Willing to question conventional logic
http://dropc.am/p/KhiI1a
Top
Post Reply

Return to “Troubleshooting”