Only downside for some is the very high print temps required to use it, 260c min.
Transparent ABS, Vapor polished.
Transparent ABS, Vapor polished.
I have been meaning to up these pics for awhile now. It's transparent ABS from plastic fantastic.
Only downside for some is the very high print temps required to use it, 260c min.
Only downside for some is the very high print temps required to use it, 260c min.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
-
McSlappy
- Printmaster!
- Posts: 800
- Joined: Wed Dec 11, 2013 9:11 pm
- Location: Queensland, Australia
- Contact:
Re: Transparent ABS, Vapor polished.
Well that looks nice! I should break out this clear ABS I have and try that 
I loved my Rostock so much I now sell them in Oz
Re: Transparent ABS, Vapor polished.
not bad... the transparent abs I made yesterday I printed at 230c.. made it on the filastruder at 183 to get the right diameter, but it printed great at 230, maybe they use something different that requires such high temps
Guanu
Guanu
-
Demolishun
- Printmaster!
- Posts: 147
- Joined: Wed May 07, 2014 4:28 am
- Location: SE Idaho, USA
Re: Transparent ABS, Vapor polished.
I am planning on using recycled PET mixed with white ABS to do something similar. Cool stuff!
Challenge yourself and be a more awesome you.